Electronics Forum | Mon Jul 16 14:48:16 EDT 2001 | mparker
Just received "Circuits Assembly", July 2001 issue. An article regarding solder balls and aperture design, beginning on page 40. This DOE had aperture, reflow profile and no clean pastes (3 types) as attributes. It is advocated that a U-shaped a
Electronics Forum | Fri Jul 24 01:28:00 EDT 1998 | Alex Ondi
I also heard of a company considering a patent on aperture design. The aperture was a "chevron" aperture, very similar to the "V" shaped aperture recently touted in SMT magazine, presumably for the purpose of reducing solder balls. Go figure!
Electronics Forum | Wed Mar 09 19:51:28 EST 2005 | KT
Greetings: I would like to know the common land patterns and aperture shapes that are currently in use. We are doing some research on the same. Please respond to the thread if you have a success story with you current design. Thanks KT
Electronics Forum | Fri Jul 05 11:45:47 EDT 2002 | stefwitt
I have seen the U-shaped aperture on a customer site, being used with success. However, the problems with the stencil and the �loose� tabs where reportedly a reason to search for different aperture designs. Before this company could test their ideas
Electronics Forum | Fri Sep 21 14:03:45 EDT 2001 | jschake
I have observed solder balling for all aperture sizes tested. Solder balling levels appear to be better correlated against the amount of solder paste that is underneath the 0201 component terminations after placement rather than comparing this to th
Electronics Forum | Thu Mar 10 14:31:56 EST 2005 | KT
Thanks for the info. Appreciate it.
Electronics Forum | Wed Jul 03 07:29:05 EDT 2002 | jax
Where did you find this article about "U-shape" apertures? I believe it is simply talking about rounded corners on the inside of a normal square aperture. ( resembling a filled in U ). It kinda follows the same ideas behind the home-plate design, wit
Electronics Forum | Tue Jun 04 22:46:21 EDT 2002 | davef
Factors to consider are: * Squeegee speed * Squeegee pressure * Separation speed * Stencil thickness * Stencil aperture fabrication method * Stencil aperture shape * Paste type * Stencil under-wipe frequency Search the fine SMTnet Archives for a thr
Electronics Forum | Sun Apr 03 00:40:35 EST 2005 | Dhanish
What is the recommended stencil aperture opening ,stencil thickness and aperture shape for CCGA?We are seeing high reject for Open solder joint.
Electronics Forum | Thu Mar 29 21:47:41 EDT 2007 | davef
PCB land to part land ratio - 1:1 Stencil aperture size - 1:1 with PCB land Stencil aperture shape - same as PCB land
.gif)
