Electronics Forum | Fri Mar 27 18:19:28 EDT 2009 | blnorman
We use paper labels with a protective coating to prevent browning during reflow. We've had no problems coating over these labels with our silicone. If your coating is not silicone, a Sharpie should print on the coating.
Electronics Forum | Fri Aug 30 07:27:21 EDT 2013 | duso02
Contact the coating manufacturer to get their response. We use many different coatings every day and they all glow differently but that has no affect on the coating itself. As stated earlier, it's job is only as an inspection tool to identify where
Electronics Forum | Sat Feb 12 02:59:39 EST 2000 | Eyal Dickerman
Suplier of Dip coating machines , Technology, Services... Mr Nicebit at ConCoat U.K.
Electronics Forum | Mon Jul 23 16:15:55 EDT 2007 | davef
Josh: Do you measure the thickness of the coupon prior to coating or do you peal the coating and measure that?
Electronics Forum | Thu Nov 21 11:19:58 EST 2013 | davef
Generally, solder connections and leads are conformal coated, unless there is a reason not to coat them.
Electronics Forum | Mon May 13 20:55:25 EDT 2024 | swilson
Can conformal coating be done to PCBs prior to burn in (Hass)? Will it affect the coating?
Electronics Forum | Wed Sep 30 11:32:45 EDT 2009 | pbarton
What type of conformal coating are you using and are you allowing the coating to migrate under the device in question? If you are allowing the coating unbder the BGA the problem could be CTE of coating is much greater than that of the BGA balls/sold
Electronics Forum | Fri Jul 10 14:29:58 EDT 2020 | SMTA-64315913
Can you share some information relative to these questions about your conformal coating process: 1) What process controls do you use for conformal coating? 2) Do you perform manual conformal coating inspection? 3) Do you use AOI for inspecting confor
Electronics Forum | Tue Apr 07 15:36:15 EDT 2009 | gtemkin
Most of the conformal coating manufacturers recommend verifying the compatibility of their coating with the solder mask, so it's no surprise that occassionally there will be such issues. Are you sure your conformal coat is completely cured? If your
Electronics Forum | Mon Aug 29 16:21:20 EDT 2011 | rjlasko
Greetings...I have a customer that has an assembly that is conformal coated with Humiseal 1A33. This assembly has some components (resistors and FET's) that heated up during operation and has discolored the conformal coating around their location.