Electronics Forum | Mon Sep 20 16:27:58 EDT 2004 | blnorman
Besides the processing tests (different print speeds, print delay times, etc.) one test we've had to use is humidity exposure. Solderballing due to high outside humidity is a problem in our plant. So we expose paste to 85% humidity for various time
Electronics Forum | Wed Jun 14 09:22:36 EDT 2006 | pavel_murtishev
Good afternoon, 1. Use only melf nozzles (Type 76) 2. In case if your melfs are picked up one after another try to increase feed time in machine setup, this will add additional delay and will allow feeder to complete feed cycle 3. Use the strongest
Electronics Forum | Thu Apr 16 10:08:56 EDT 2009 | waveroom
Sorry for the delay. We are actually pretty busy over here. We have found the Aim 257-2 no-clean sac305 paste offers very little if any voiding and better wetting in lead free terminated devices. My suggestion is contact your local Aim distributor fo
Electronics Forum | Wed Nov 04 10:31:25 EST 2009 | vetteboy86
I'm not familiar with a puff off setting. I have tried some different things including release delay to shut the vacuum off before the nozzle lifts in the upward direction. I tried to minimally overstroke the part hoping the paste tension would over
Electronics Forum | Mon Feb 20 15:17:54 EST 2012 | acsscott
Ok, getting further. We have 3 Philips CSM machines, new to the Topaz. Sorry for all the questions. We figured out that you have to press any key during the 6 second delay at power up. It then ask's for the password, or press the escape key to co
Electronics Forum | Fri Dec 21 16:34:28 EST 2012 | bdamico
Hello All, Some of the issues reported in this thread sound similar to those commonly experienced with network delays. A very simple way to determine if this is indeed the case is to run directly off of the system hard drive versus a network hard d
Electronics Forum | Tue Apr 23 02:28:24 EDT 2013 | padawanlinuxero
I will go with Hegemon and Swag, our mirtec has those delays too, our system run locally, and when the hard drive gets full it crash, so we had to install a second hard drive of 1TB and save all pictures there like a backup we run it every weekend, n
Electronics Forum | Tue Oct 01 11:56:57 EDT 2013 | bobpan
I would try the following: 1. Back up your mod codes or make sure they are up to date. 2. Turn off the machine and slide a business card between the battery and the clip located on the EPCU card in the front card rack. 3. Download back in your mod co
Electronics Forum | Fri Aug 11 22:50:57 EDT 2017 | heros_electronics
Anyone who knows how to prevent such flaw? Tombstones are those lifted components from one sides. This results in costly and time-consuming amounts of touch-up and re-work after the assembly is completed. For the customers, this extra work translate
Electronics Forum | Thu Aug 31 02:02:58 EDT 2017 | hxamalia
Hello ALL Good day , it is Amalia from HX Circuit Technology Co.,Ltd in China, we are a prefessional PCB factory with many years. We are focusing on quick lead time for PCB with good service . please contact with me now ,thanks Email: amalia@hx-