Electronics Forum | Thu Aug 12 18:35:02 EDT 2021 | oxygensmd
Press emergency button, release it and you will get an error report. Sometimes table motor doesn't work properly on my EKRA E5 and I see where to search if something not okay. Let me know your results.
Electronics Forum | Mon Mar 14 20:05:30 EDT 2022 | cbeneat
We are still running an EKRA X5. 2008 build. 1,366,000 cycles. Being swapped out in the near future with an X5 Pro. But we're going to hold it for emergencies. We've found the older X5's are pretty bullet proof. Just keep up on the maintenance.
Electronics Forum | Wed Oct 12 17:45:07 EDT 2022 | rmcmartin
I received an error message from our Sony F209 pick and place machine saying E17 servo controller is in emergency stop. It says the remedy is to cancel the input or replace the cable. where is the E17 servo controller and how do you cancel the inpu
Electronics Forum | Mon Dec 05 09:14:14 EST 2022 | peterm
Invoke. The PTF Setup Procedure dialog box displays. 4. Select Product. The Select Product File dialog box displays. 5. Select the same product used in the Open PTF Teach Product section above. 6. Enter the Slot number for the PTF and select Full
Electronics Forum | Wed May 23 13:34:06 EDT 2001 | Mark Smithers
The trend of the smaller PCB and devices has been occurring for many years now. However, recently, we are seeing signs that a segment of the market is returning to larger board sizes....30" x 30" and larger. Does anyone have good sources for data a
Electronics Forum | Wed Jun 13 16:56:19 EDT 2001 | gsmguru
The only ones we've tried so far are Indium SMQ92 & AIM NC251 + one from Sinju (SP ?) that I can't remember the Part # for. They all printed fairly well. The pump seems to be a bit more forgiving than traditonal blades. The Rheo pump may mask some pa
Electronics Forum | Fri Jun 15 09:16:46 EDT 2001 | adam
Thanks Dave. About your second comment, the issue is placing BGA connectors mirror image (male, and female), the connector sometimes shifts during placement before reflow. we are using a six mil stencil for both sides with minimum paste deposit. a
Electronics Forum | Mon Jun 18 21:21:25 EDT 2001 | davef
Two things: 1 A flat surface will probably help the "balls on the socket sliding off the ridge of HASL" problem, but possibly consider less risky choices for your flat surfaces that immersion silver, like: OSP, ENIG, and immersion tin. 2 Don�t throw-
Electronics Forum | Tue Dec 17 13:42:04 EST 2002 | robf
There are a few emerging technologies that have been growing in popularity for the past few years. Pin through paste, press fit connectors and selective soldering machines seem to be displacing custom fixtures. Most of the mixed technology boards o
Electronics Forum | Mon Dec 16 13:18:23 EST 2002 | gregp
Your analogy of radio use in a car is not fair. In fact, I believe in many states the use of walkman headphones while driving a car is illegal. Just like in your work environment, you wouldn't be able to hear sirens (emergency vehicles or pick and