Electronics Forum | Sat Mar 11 08:37:35 EST 2017 | tch
My company has had the same issue on our Versaflow 366 with SAC305, we tried ultrasonic cleaning and it worked for a shift and then was clogged again. We have had the machine for 3 years and we have had to replace the gassing rings twice so far. We a
Electronics Forum | Thu Dec 29 11:43:46 EST 2005 | samir
CMiller, Thanks for the valuable info! We are in the midst of lead-free deployment and need to know good alloy choices at both wave and ERSA. I have heard the same things regarding SAC305's price for bar solder, but don't yet know what the process
Electronics Forum | Tue Aug 30 10:55:49 EDT 2005 | stalkerb
Hi Cmiller, Sounds like someone else is finding out the benefits of the Versaflow. Your comments are all valid.....? What spec of machine do you have.....? Are you running low Vol high mix.......?
Electronics Forum | Thu Oct 04 00:05:25 EDT 2018 | gaintstar
Flason SMT chip mounter Reflow Ovens: http://www.flason-smt.com/product/PCB-assembly-line-equipment-SMT-spare-parts-Dek-Motor-188962.html http://www.flason-smt.com/product/PCB-Conveyor-for-LED-Production-Line-SMT-Assembly-Line.html http://www.flason-
Electronics Forum | Mon Aug 29 12:52:21 EDT 2005 | pr
We have 2 dual head Versa-flows in line. We use them mainly for doublesided reflow jobs that have connectors and axial parts. I have about 15 jobs currently running on them. The advantage of having 2, is some of our boards have through hole on 1 side
Electronics Forum | Tue Aug 30 10:48:18 EDT 2005 | cmiller
If you do not have a lot of TH joints there are some advantages. No boards "submarined" in solder pot on wave. You can solder the bottome side SMT parts rather than epoxy them when the parts are put down. This should reduce SMT defects and missing pa
Electronics Forum | Mon Apr 29 13:56:19 EDT 2013 | williamaxler
We have a Versaflow 40/50 and ours is setup like this. We have out nozzle test position set so that in the Z axis you are 3.8mm away from the pin. Used feeler gauge Then you can set your gradient per nozzle. Start with a number then do a wave offs
