Electronics Forum | Fri Oct 08 08:26:03 EDT 1999 | Carol Zhang
| | | I have a board, 4 spacers needed to be soldered on the board | | | first with the normal 62Sn37Pb alloy. Then, capacitors are manually soldered on the boards. The density of the board is quite high. If we wave soldered capacitors first, ther
Electronics Forum | Thu Oct 07 16:57:02 EDT 1999 | Glenn Robertson
| | I have a board, 4 spacers needed to be soldered on the board | | first with the normal 62Sn37Pb alloy. Then, capacitors are manually soldered on the boards. The density of the board is quite high. If we wave soldered capacitors first, there wi
Electronics Forum | Wed Nov 28 06:06:18 EST 2018 | msbettyhunt
Even, proportional–integral–derivative (PID) algorithm works well in this case.
Electronics Forum | Wed Dec 12 07:59:07 EST 2018 | mermarinc
@BettyHunt, thanks for sharing.
Electronics Forum | Tue Oct 16 10:06:41 EDT 2018 | emeto
Hello experts, I have an assembly that goes through pretty tough sterilization on regular basis. Currently I am using a two component material in potting process. I was wondering if you can help me with material that can handle high temp and humidit
Electronics Forum | Thu Nov 01 12:52:18 EDT 2018 | emeto
Thanks Rob, It looks like my customer wouldn't let me to change the material. However, this potting material still sticks to the non sticking fixture that I have. Can anyone give me a non sticking material that I can make these fixtures out of?
Electronics Forum | Tue Nov 27 08:40:24 EST 2018 | ethanscott
I don't think could suggest anything different than what Rob has suggested. It's really nice to have such information. Thanks, Rob for sharing it.
Electronics Forum | Wed Oct 17 02:04:39 EDT 2018 | robl
SCC3 has an operating temperature of 200C, as long as it is heat cured at 100C. https://www.electrolube.com/pdf/tds/044/DCA.pdf It's also a silicone so needs to be coated & cured away from anything you value. Otherwise there are plenty of PU's and
Electronics Forum | Fri Nov 25 09:27:09 EST 2011 | fjtxra
Dear All, I´m looking for a low temp solder paste with Lead. I know that, with lead free, is common solder paste with bismuth for low temp in Pin in Paste line, but one customer aks me about low temp solder paste with lead. If anybody knows about and
Electronics Forum | Fri Nov 25 14:52:50 EST 2011 | davef
Sn43/Pb43/Bi14 is a low temperature leaded alloy that has been used with very good success. The low melting point helps avoid some thermal shock issues on some assemblies. A word of caution, this alloy forms a low melting point at approximately 95*C.
.gif)
winsouce.jpg)
