Electronics Forum | Wed Mar 18 10:09:04 EDT 2015 | akyzum
Thank you. problem was with a power supply. replaced and now up and running.
Electronics Forum | Mon Jan 06 10:10:35 EST 2020 | emeto
If it is not your power supply being wrong, check if you have UPS inside oven working properly.
Electronics Forum | Fri Apr 09 01:48:20 EDT 2021 | ttheis
Have you tried searching the motherboard or power supply part number on ebay to see if a spare is available?
Electronics Forum | Mon Apr 12 19:11:28 EDT 2021 | compit
video card is damaged, check also 12V power supply or HD - sometimes defragmentation helps (!!!)
Electronics Forum | Tue Oct 17 15:04:22 EDT 2023 | unsung
Another picture of power supplies
Electronics Forum | Mon Feb 02 12:46:36 EST 2004 | kauer
Just a hunch, pull out and re-seat the cards. also check power supply voltage. We bought 2 used machines and one of them would not boot up, the software would just go in a loop. Turns out the 5 volt power supply was low, 4.85v. just low enough to cre
Electronics Forum | Thu May 20 11:04:31 EDT 2004 | SWagner
I do not think it's your power supply, its probably the monitor, I spent two days nearly four years ago on this problem, the 265's power supply can be dropped out by a problem with any of the voltages, they are not isolated. Try using a known good c
Electronics Forum | Tue May 24 05:25:17 EDT 2005 | Zsolt
We had similar problem, the root cause was that the cooling fans on the VME rack were not working and the vision card hangs up if the temperature is too high. Also check the power supplies, we had also a problem that the filter condensator inside the
Electronics Forum | Fri Dec 08 08:57:58 EST 2006 | MGC
Hello SMTnet, > > I would like to make a power > supply for Universal multi pitch feeders so I can > index them offline. How much voltage do I need to > get to what pins of the connector? Thanks. http://hoverdavis.com/Products/universal/mpup/uf
Electronics Forum | Wed Dec 23 19:50:28 EST 2020 | ttheis
Thanks; I have a spare power supply coming as well. I will start by swapping dc-dc converters first and if the problem persists swap the pdp power supply. I'll report back what I find.
.gif)
