Electronics Forum | Thu Apr 27 05:48:32 EDT 2017 | pavel_murtishev
jin, The answer is no. DOS has to be installed from distributive normally supplied with machine. Hopefully, machine data has not been erased. If it has been erased, than machine will have to be recalibrated. Regards, Pavel
Electronics Forum | Thu Aug 10 16:34:18 EDT 2017 | kalsi311
Thanks for quick reply We were using 2 MR40LS machines and 1 MR20LP machine. MR40LS machine have tow beams and 12 heads (6 heads each) and MR20LP have 4 heads. In my new company we are using 2 lighting head who have 30 heads and 1 7 heads machine. B
Electronics Forum | Fri Jan 12 15:14:37 EST 2018 | dhollland
Does anyone have any experience with the Panasonic offline recognition machine? If so, thoughts? Would you recommend? Pros and cons? We would be using this with NPM W2 machines...and possibly CM402 machines if possible to use with both.
Electronics Forum | Mon Oct 29 14:05:39 EDT 2018 | reckless
I agree. Not sure what type of support there is on old machines. I was confused as the GEM machines were manufactured by Yamaha. Is there any issue with it being a DOS based machine? We are only running 1-2 main boards so no changeovers.
Electronics Forum | Thu Apr 02 22:10:52 EDT 2020 | sarason
Send them an email. The software is really quite something for multi-machine lines, mixing highend machines from multiple manufacturers. At a very reasonable price. Also it can import and export the SMT machine files for all of the machines it sup
Electronics Forum | Fri May 21 14:15:54 EDT 2021 | oxygensmd
RVI-RVII calibration is not enough? In software (both machine configuration on this machine and in machine software you can change head setup). If you have the same head in this machine, all you need to do, head calibration.
Electronics Forum | Mon Mar 14 09:20:31 EDT 2022 | paddymanoj
I am planning to purchase an old Wave Solder Machine that is in good working condition. The make and model is EWS-310SLF-10121357. Would like to know if spares would be available for this machine? What would be the fair price for this old machine?
Electronics Forum | Tue Mar 14 17:05:45 EDT 2023 | helder_remelhe
Actually we have problem in an machine Samsung SM411. the machine stop the in Initializing machine I/F. i tried remove the VME-PCI and clean the connector and put again, change the CAn board and the result is the same. someone have an ideia of the
Electronics Forum | Tue Apr 18 04:54:30 EDT 2006 | bayanbaru
We are using Siemens pick and place machine for chip placement. Our goal is to continuous production during component replenishment. In Siemens machine, the feeders that can be removed, reloaded, and placed back on the machine while the machine is ru
Electronics Forum | Wed Jan 06 04:43:22 EST 2010 | deltaservices
If you are working smt machines in Europe or US then your most important issue is setup time and operators needed to run the machine. People are way more expensive then machines. I know the assembleon machines, Gem line and the new MG lines are grea