Electronics Forum | Wed Feb 09 09:54:50 EST 2000 | JAX
Trying to place PTH components with an SMT machine is possible but maybe not plausible. Would you have to buy specialized tools and equipment for the job ( gripper nozzles ). Are the machines you have capable. i.e.. Would you need camera modification
Electronics Forum | Fri May 01 13:31:36 EDT 2020 | emeto
Omron were building some hybrid AIO/X-ray in one machine package
Electronics Forum | Fri May 01 14:54:12 EDT 2020 | capse
Disclaimer, I'm a VJ Electronic Rep. The VJ Electronix XQuik II is an x-ray parts counter. You can load a PCBA into the system and capture an x-ray image. The system has zoom functionality. But, you will not get the type of measurement and inspection
Electronics Forum | Tue Nov 25 05:20:20 EST 2014 | grimus
Could be. I am making overprint to achieve proper amount of solder paste inside hole. Now I am trying to reduce maximum overprint and compensate it with step - up stencil. This could reduce effect that some particles of solder paste are not gathering
Electronics Forum | Wed Nov 09 12:06:33 EST 2005 | Rob
I don't want to throw a spanner in the works here, but a large proportion of chip resistors & capacitors have been ROHS compliant for a couple of years now, the manufacturers have just not declaired it. Could it be that the part you have just has
Electronics Forum | Fri Dec 15 05:02:42 EST 2000 | SaiWong
It is not gonna work. Even though you fine tuned the CP3. 0603 is the maximum. The camera design is only for the 0603 maximum. If you use it for 0402. I think at least 60% of the component are gone. Also, there is no 0802 feeder for the CP3. How can
Electronics Forum | Wed Feb 09 21:41:27 EST 2000 | Dave F
Jack: You should use your components promptly. Don't store 'em, only bad things will happen to them. 1 You should store all your components, not just your SMD reeled components, so they are not damaged or their solderability decreased. Check the
Electronics Forum | Tue Dec 11 19:48:37 EST 2007 | arun2382
Hi, If I were working with a 75 um thick stencil, Is there a spec. as to what the maximum value allowed on actual solder height measurements? Stencil type: Laser cut and electropolished Solder paste type: Type 4 Sn-Sb Would the measured values va
Electronics Forum | Thu Nov 11 10:55:32 EST 1999 | KenF
Hi, could anyone tell me the maximum size of an SMD ceramic capacitor that can be assembled on a copper based substrate reliably? The SMD will be reflowed on the copper substrate. The main concern is the CTE mismatch between the ceramic capacitor and
Electronics Forum | Tue Jul 19 18:05:31 EDT 2016 | davef
I'm not real clear on what you're looking to understand, but let me get things started ... IPC-A-610F - Acceptability of Electronic Assemblies, 7.3.3 Supported Holes – Wire/Lead Protrusion Minimum length: You need to be able to discern the compone