Electronics Forum | Thu Aug 05 17:32:31 EDT 2021 | cyber_wolf
Including non-spring tools ? Additionally I assume you know how to use the tool install utility and have looked for things like cracks in the big ribbon cables on the X ? Tools are not dry and have white grease on them etc ? There is a show force
Electronics Forum | Fri Aug 06 14:01:53 EDT 2021 | tomdegas
Unfortunately all my tools are spring loaded. Yes I do know the tool install utility. I have been running and maintaining the 3 MyData machines for over 20 years and I never saw an error like this. I grease our tools once a month so I know that is
Electronics Forum | Thu Jul 30 17:31:41 EDT 2015 | dyoungquist
We are running a Mydata (Micronic) MY15E. The MY100 is the next generation after the MYxxE series. As far as I know, there is no way for the machine itself to check the polarity of ICs to see if 1 or more are in the tube or reel different from all
Electronics Forum | Sat May 12 15:21:00 EDT 2001 | edmentzer
We are also a medium volume, high mix contract manufacture, last year we purchased a MYDATA MY12 with Linescan and Hydra. It is a great machine. We had a MultiTroniKs before but it was not as good as the MY-12. The MYDATA will do everything and do
Electronics Forum | Thu Nov 18 00:28:02 EST 1999 | Scott McKee
Use Mydata. I've built huge backplane boards, round boards, 1/4" thick boards, 1"X24" boards, 1"X1" boards, L-shapes boards; all without any carriers or tooling. If you buy a MY15 you can increase the board size to 5'X2' (60"X24")... As for ovens,
Electronics Forum | Mon Jan 14 15:15:25 EST 2002 | burb1999
Currently our company is in the process of putting together a SMT prototype line... I have experience with fuji, universal, DEK, MPM, BTU, Electrovet in a high volume application. Now with prototype builds we have narrowed down a few and would like
Electronics Forum | Mon Apr 09 10:16:14 EDT 2007 | davef
Pick and place: * Fuji: The largest pcb size is 20" by 18" for pick and place; 18"x14" for chip shooters. Fuji NP XL series allows 27 by 23 inch boards using a conveyor. * MYDATA has machines that can be configured to 34" X 44" X 0.500" * HSP 4796A a
Electronics Forum | Mon Jun 23 13:01:54 EDT 2008 | wschulz
Hey guys, My company is currently looking into developing a SMT line. I have an interesting perspective on this due to the fact that I worked a SMT line for quite a few years as an equipment operator. Now I am an engineer and at a different company
Electronics Forum | Fri Nov 22 10:24:28 EST 2019 | rgduval
When you swapped the MOT card, did the proble move to another axis? I'm guessing no, but, wanted to clarify. If the problem did not move, you either have an x-motor problem, x-motor counter problem, or x-transducer problem as noted. Or, a cable pr
Electronics Forum | Wed Aug 18 13:48:12 EDT 2021 | rgduval
It's been awhile, but, some other things you might look at: - Check the fiducials on the toolbox. If they're getting obscured/damaged, all kinds of weird things can happen. I had problems initializing tools one time because of this, and I could actu
