Electronics Forum | Thu Aug 05 20:37:22 EDT 2004 | Haran
Pls advise how the part thickness affects the placement for Chip Shooter like CP6.
Electronics Forum | Fri Aug 06 09:27:29 EDT 2004 | Bob R.
It depends entirely on the machine. Different machines use different mechanisms and control methods.
Electronics Forum | Fri Sep 25 13:09:42 EDT 2009 | rmitchell
Thanks to those that responded. I eliminated the light curtain problem. The metal plate the light curtain pcb bolts to was bent. I had it aligned in our machine shop and it worked properly. I forgot to mention the error was pooping up with no fee
Electronics Forum | Wed Aug 04 18:12:27 EDT 2021 | tomdegas
I am trying to install an A12 tool on my MY15 and I get the following error: "F-TLMN-9: Failed preliminary fetch during installation" I looked it up and it says Operator error and that the tool is missing. The tool is in the tray and the MY15 picks
Electronics Forum | Mon Jul 10 08:58:37 EDT 2006 | andyspaziani
Error we get is quadalign. Calibration is good. Signal for this head appears better than #2 which works fine. As soon as 1 picks up the first part we get quadalign error. Thanks for any help you may have. Andy
Electronics Forum | Fri Sep 07 07:39:11 EDT 2001 | caldon
Can you confirm the components are being picked up from the feeders? If the Feeder table calibration is incorrect the components could be picked up off from the begining. This would result in 1) nozzle barely picking up the part and as the head moves
Electronics Forum | Tue Aug 21 11:18:56 EDT 2001 | roger
Michael, Please keep in mind that this is an SMT Forum, designed to exchange technical information and opinions. While you are free to suggest that a reader investigate a particlar product or service, please save the full-blown advertising for SMT o
Electronics Forum | Sat May 19 04:09:17 EDT 2012 | gme
We are mounting 3528 package LEds with pick & place machine.The problem is , nozzle picks up the LED , but it stick to the nozzle & not placed. Then it gives error in the next cycle. Can anybody suggest the solution?
Electronics Forum | Sun May 20 00:11:45 EDT 2012 | kiss
We are mounting 3528 package LEds with pick & > place machine.The problem is , nozzle picks up > the LED , but it stick to the nozzle & not > placed. Then it gives error in the next cycle. > Can anybody suggest the solution? Please advise on mo
Electronics Forum | Wed Mar 22 03:00:09 EST 2006 | meritajs
Hi All, We have problem with Zevatech FS-730 This machine shows error E202062: "System error: T axis of head: Parameter error when T axis performs PTP action.(Kind of unit)" and it stop running. It does not pick up components. At low speed it works s