Electronics Forum | Fri Sep 26 08:11:15 EDT 2008 | dwelch123
Try swapping cards in Y1 enclosure. You can swap zero and one or two and three but make sure you change the shunt position and the dip switch settings and see if your problem switches cards. The lithium battery likes to fail on those cards. Reload th
Electronics Forum | Mon Mar 03 12:30:13 EST 2008 | vikkaraja
That was the first thing I did. I reloaded the software and machine actually started to work. After 2 hours machine crapped out again with same problem.
Electronics Forum | Thu Feb 22 22:49:39 EST 2007 | vshan
software v4.03
Electronics Forum | Fri Dec 20 05:44:43 EST 2019 | hemantpang23
Thanks for your reply We checked all the hardware found ok voltages are as per specifications Suspecting software issue but don't have software for installation Please confirm if you have this software version 04.03 so that we can have last try
Electronics Forum | Fri Sep 26 12:16:52 EDT 2008 | bickt
you cannot swap 0-3 only 0-1 or 2-3 they are not the same euro cards. they function very diffrently. if you look you will see there are more chips and circuitry on one set. there are 2 w/red leds and 2 with green leds. at least thats how they soo
Electronics Forum | Mon Mar 03 11:37:34 EST 2008 | lysik
OK I'm a tech and I would not start with replacing both a computer and a camera. spend as much time with tech support as possible via telephone that is what they are there for. If they can't help keep posting this message. The good old stand by is to
Electronics Forum | Thu Aug 30 04:40:38 EDT 2012 | menatech
could be a hardware problem (processor board, harddrive) but this overflow message is most times software related. delete the calib file for an other trial. have you the machine software for reinstall?
Electronics Forum | Sun Oct 28 01:55:12 EDT 2012 | dman97
Hi, Does anyone have a copy of the system software for a 265 Horizon? I need the base software version 06. I have the SP update CD's but they don't help. I am getting a base system software is missing so upgrade cannot be started message when I in
Electronics Forum | Tue Jul 31 22:32:35 EDT 2018 | dekhead
Hardware dongle on back of machine is software key which may or may not be required for your software (depends on software version) and has nothing to do with the error you are experiencing. The hardware link to which I refer is on the Y1 backplane
Electronics Forum | Thu Feb 22 22:01:18 EST 2007 | dekhead
Software version running? Is this on one product or all products? Left to right feed? If yes, is board at left sensor being keyed? Right to left feed? what is setting for "right feed delay", increase it?
.gif)
