Electronics Forum | Wed Dec 13 12:08:57 EST 2000 | Stefan Witte
Apparently the adhesive tape peels off from the joint, which could have some reasons. 1. There should be an overlap of the cover tape, as Cal mentioned. The new cover tape laying over the old by approx. 2mm. I also peel the cover tape a bit off, whi
Electronics Forum | Wed Sep 21 10:40:18 EDT 2005 | PWH
Splicing for us has been a rough go as we haven't really found a tool that works well/fast. We have a few different machines = different feeders. They all react different to a splicing "style". The best so far is a crimp tool that crimps a brass s
Electronics Forum | Fri Sep 23 08:16:57 EDT 2005 | gregp
Base, You are absolutely correct. This is what I intend to do. In fact, our feeders at one time had reel hangers that would allow for reel removal and thus splicing. Sometimes it is frustrating when people are set in their ways and won't consider
Electronics Forum | Mon Jan 06 17:42:36 EST 2003 | gregp
That is true. But maybe for discreets in paper tape where the bulk of your partially used reels is it may be helpful. The rest you can guestimate. Not very good of course. As a placement machine manufacturer I agree every machine should have real
Electronics Forum | Thu Feb 24 23:01:30 EST 2005 | smtuser1234
One other thing to check is your PEC camera. Universal uses a jig to calibrate this camera but you could check it using this method. 1.Run about ten 0402 parts on tape with the PEC camera off and check placement. If the placement is off change the x\
Electronics Forum | Tue Feb 08 20:40:55 EST 2022 | joekirin
I have a GPD CF8 that does a good job at this. I believe they may even have an option to count components that have been formed. https://www.youtube.com/watch?v=WHI1aEJ89jw
Electronics Forum | Tue Jun 20 21:55:42 EDT 2006 | davef
Questions are: * What is your concern about this capacitor? * Are you running a leadfree process? * Is the component leadfree? Generally, we are ecstatic when compoents are on tape and not in plastic bags. And if they solder, well, we're dancing in
Electronics Forum | Thu May 10 10:59:36 EDT 2007 | pima
We ve got storage next to factory. We use trolleys to transport material to SMT machine so hard to suspect bend leads during tansport. Anyway any good documents saying about this will be good to have.
Electronics Forum | Fri Feb 18 06:34:39 EST 2005 | bobpan
rotate the machine 5 degrees and the placements will be dead nuts!!!!!!!
Electronics Forum | Wed Dec 18 19:52:25 EST 2002 | kennyg
Problem: A SMT fine pitch or BGA component needs to be baked due to MS concerns and is needed in a hurry. In some cases the packaging will not allow a high temp/short duration bake. Production will not allow a low temp/long duration bake. If the part
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, China
Phone: 0755-33578694
.gif)
