Electronics Forum | Thu Apr 01 16:47:23 EST 1999 | AlexO
Dan, The rationale to use laser cut stencils in my experience is based on the benefits to paste release. Laser cut stencils are "supposed" to have a smoother inner aperture wall. That, combined with the trapezoidal shape (which can be emulated with
Electronics Forum | Thu Mar 25 15:10:45 EST 1999 | Dan Hughes
We make an excellent chem-etch stencil. Our customers have had success printing 16 mil pitch without a problem. This is not an advertisement! When we try to sell our product to new customers, we find more and more people willing to pay more for the
Electronics Forum | Wed Jul 15 12:22:57 EDT 1998 | Steve Moore
Electropolishing definitely improves the print characteristics of both Laser-cut and Chem-etch stencils. The caveat here is avoid over polishing which results in rounding of the edges and/or enlargement of the openings. Over polishing is typically th
Electronics Forum | Wed Oct 19 08:31:50 EDT 2005 | Erik
They said arround 300.000 USD :) I guess thats a good printer and a used stencil laser. Greetings Erik
Electronics Forum | Mon Mar 02 17:31:41 EST 1998 | Nechan Naicker
I am looking to purchase a laser stencil cutting maching for use in South Africa.
Electronics Forum | Sun Mar 01 13:18:42 EST 1998 | Sam Sangani
Are you using Stencils to apply solder Paste for your surface mount PC board ? If so, please visit our web page http://www.pnconline.com/stencil.htm We make Laser Cut stencil with Re-Usable ACCUFRAME at lowest cost in the SMT industries. We also wil
Electronics Forum | Fri Jul 10 10:40:13 EDT 1998 | Todd N
Hi all, We are currently having problems with a laser-cut stencil that is electropolished and nickel plated with 9-mil openings. The paste does not release well from the apertures. We are having to wipe after every print. The board is fixtured well a
Electronics Forum | Sat Jul 11 06:56:35 EDT 1998 | Tom Denison
| Hi all, | We are currently having problems with a laser-cut stencil that is | electropolished and nickel plated with 9-mil openings. The paste does | not release well from the apertures. We are having to wipe after every | print. The board is fixtu
Electronics Forum | Sat Jul 11 06:56:03 EDT 1998 | Tom Denison
| Hi all, | We are currently having problems with a laser-cut stencil that is | electropolished and nickel plated with 9-mil openings. The paste does | not release well from the apertures. We are having to wipe after every | print. The board is fixtu
Electronics Forum | Mon Feb 23 21:27:20 EST 1998 | fxb
| I have the following questions with regards to the solder printing stencil design : | 1) Is the Electro-polish process recommended for laser cut stencil ? | 2) Should the aperture walls be slanted at an angle or straight wall, i.e. trapezoidal |