Electronics Forum | Mon Jul 12 11:35:27 EDT 2004 | Pierre RICHARD
Here are some answers to my questions after a good research. I also added more definitions that could help understand this esoteric language used in assembly, specially surrounding fluxes and their use. In blue italics are comments and extracts from
Electronics Forum | Tue Aug 22 03:04:07 EDT 2006 | PP
Any help/suggestion is much appreciated I am doing lots of BGA Reworks from a small uBGA with a few balls to a large BGA with over 1500 balls. The reworks have been done on SRT 1100 Series Machine for many years. SRT 1100 Machine is good for the c
Electronics Forum | Thu Jan 27 11:45:04 EST 2005 | Mark
Based on the components mentioned, it sounds like you need a soldering station rather than a bga rework station. The equipment mentioned would allow you to rework fine pitch QFPs and BGAs. Reworking an sot-23 using one of those systems is inefficie
Electronics Forum | Wed Jan 26 13:09:13 EST 2005 | reash
What system would you guys recommend as a good rework and repair system in the $10,000-$40,000 range or so? The company I work for is just starting to branch out into working with SMT components.
Electronics Forum | Tue Jan 31 13:41:12 EST 2006 | outgasser
We are currently experiencing problems with delamination during rework/2nd op activity on lead free. I am suspecting this is a result of the use of a heat gun to rework components. My assumption is that the high heat and time in area greatly increa
Electronics Forum | Fri Jul 23 12:49:47 EDT 1999 | Tony
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Mon Jul 26 10:44:08 EDT 1999 | Boca
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Thu Jan 27 11:33:59 EST 2005 | russ
For what you have right now I would recommend that you use soldering iron tips that are made for component removal. until you get BGAs I wouldn't worry a whole lot about the expensive rework equipment. I would use specialty tips and a heat gun wit
Electronics Forum | Thu Jan 27 13:05:32 EST 2005 | reash
Thanks for the feedback. I'd still like to know what you guys think about Pace. Maybe we'll look into their MBT-250-SDPT Repair System (http://www.paceworldwide.com/_ShowSystemDetails.asp?ProductGroupID=2∏uctID=26 ). Or maybe even a very low-end R
Electronics Forum | Wed Dec 12 11:35:26 EST 2012 | rway
I work for an electronics manufacture. Our end product is on PCBAs. My question is related to the use of safety glasses, which I know are required when doing rework. But here is the question: We ordered side shields for prescription glasses. Wha