Electronics Forum | Tue Jul 27 11:32:01 EDT 1999 | M.L.
| | Presently protos of micro-bgas (80i/o) pitch .030/.031 | | 12BGA per assembly | | | | The board is a (.062, 4 layers) FR-4 using Dry film | | Pads .014inch | | Vias within footprint .020inch | | Vias to be filled by bottom side(solder side) only
Electronics Forum | Fri Jul 13 18:25:09 EDT 2007 | seankim10
It sounds like more has to do with plating. you may also check out the voiding issue especially if you have new FAB or the supplier. I had problems with a RF chip in QFN package due to insufficient grounding that voiding caused. This ground is often
Electronics Forum | Sat Aug 27 09:47:05 EDT 2005 | davef
From the pic, we see blistering, but none so close to via that we'd attribute the blistering to via, via plugging, or anything of the sort. When we see blisters like this, we think of a surface contaminant being present on the boards at the time of
Electronics Forum | Tue Mar 22 08:05:59 EST 2005 | jdumont
Morning all, my question is regarding the use of filled/tented/plugged vias on the BGA site. What are you guys doing for this? What type of issues can this cause if using none, or the improper via design. Regards, JD
Electronics Forum | Tue Aug 23 03:42:10 EDT 2005 | Adeline
presently, the production facing this problem. We has couple of brd which is electroylic gold finishing with plug via. The brd has blister after the PCBA (in lead free temperature, 265 degree) Some time, bare brd already has the blisters. But most of
Electronics Forum | Fri Dec 01 13:30:08 EST 2017 | kojotssss
Stencil thickness is 4 mil. Via's are plugging from bottom. Gas may be developed under the component? Take Reflow Ovens Thermal Profiling changes? In your opinion?
Electronics Forum | Thu Dec 07 00:55:51 EST 2006 | billylim
As you are aware the common method to rework BGA is : 1. Remove BGA with hot air reflow machine ( SRT as current practice) 2. Clean the BGA pad using solder iron and solder wick. 3. Replace BGA with SRT rework machine. The problem we have with
Electronics Forum | Mon Mar 07 10:14:31 EST 2005 | jmedernach
Cellular and PDA architectures employ this technology all the time. You have to be careful with your board supplier as well as with your plugging approach. Leave the via unplugged, I guarantee voids in the solder joint. That leaves us with, "how d
Electronics Forum | Thu Mar 03 08:06:36 EST 2011 | scottp
I've seen this with through hole via in pad with soldermask plugging from the opposite side. Baking the boards solved it. Not using such a horrible via in pad method would also have solved it, but that wasn't an option. Is this ball sitting on a v
Electronics Forum | Tue Jul 27 16:44:31 EDT 1999 | Earl Moon
| | | Presently protos of micro-bgas (80i/o) pitch .030/.031 | | | 12BGA per assembly | | | | | | The board is a (.062, 4 layers) FR-4 using Dry film | | | Pads .014inch | | | Vias within footprint .020inch | | | Vias to be filled by bottom side(sol
