Electronics Forum | Tue Apr 18 07:28:32 EDT 2006 | JH
Mark, I am having difficulty picturing exactly what you are doing, but I hope this helps. We occasionally use jigs through SMT, usually because the board is too small/thin to fit the smallest rail width. In such situations, we normally make the jig
Electronics Forum | Tue Apr 18 17:59:07 EDT 2006 | karenp
Hi guys: I'm trying to get the recommended pressure for stencil edges using air compression, I'm working with I-source but they don't have any standard like IPC or something that can help me to use and decrease the replacement of stencil because of
Electronics Forum | Thu Apr 20 07:53:24 EDT 2006 | Yanick
Hi, I'm just wondering if someone have more information about board with immersion tin plating. I search in the archive but didn't find anything interesting. We try it, and we have difficulties to make a good solder joint with the wave. And wi
Electronics Forum | Tue May 02 16:37:57 EDT 2006 | bhall
I have experienced the exact same problem with excess solder touching the plastic component body. The solution in my case was simply to replace the stencil. I was using a reusable stencil frame that had been worn out. I replaced the stencil with a so
Electronics Forum | Fri May 12 13:33:27 EDT 2006 | mika
...Ehhhh?? Mark Fick, If the SMT Splice Clips or Kapton tapes does not solve Your DEK-265 motor comms failure problem, maybe try this: The 5 Volts should be within +/- 0.05 V. and if I remember correctly it must Not be under 4.5 V. We have been th
Electronics Forum | Mon May 15 11:16:10 EDT 2006 | timnop
In an attempt to re-establish this thread as a serious request for professional experience and opinions on the Kester K100LD product, let me ask again!..... Have any of you professionals out there tried this product and if so, what was your experienc
Electronics Forum | Wed May 17 16:15:30 EDT 2006 | muse95
Try from this link. Then you just need to select the link for the pdf document. http://forum.europa.eu.int/Public/irc/env/dir_2002_95/library?l=/stakeholders_comments/individual_business/rohsusa_inc/jes00c337pdf/_IT_1.0_ Patrick's link didn't work
Electronics Forum | Thu May 18 09:52:09 EDT 2006 | russ
Guru, you are nothing but a liar, any respectable consulting firm would not use a name as Guru Expert. Also would not change from a contamination thread to all the BS you just threw out trying to impress with your vocabulary. One does not need to qu
Electronics Forum | Tue May 16 01:23:10 EDT 2006 | Base
Try Assembl�on. The 2.0 version just came out so the 1.x versions are probably no longer available. I believe they start charging you for it now, but it won't be much since the previous versions were free. If you can manage to track down a 1.x versi
Electronics Forum | Thu May 18 11:00:51 EDT 2006 | Chunks
Thanks Doctor - as always, you're right. I must've been typing with my mittens on. It's starting to get cold on this part of the planet these days. I wasn't blaming anyone, just trying to take a few questions marks away so "we're" left with the an
.gif)
