Electronics Forum | Tue Nov 30 06:33:44 EST 2010 | jmw
If you are using the upward camera then you probably have to put in a placement offset for each head. This only effects upward camera placements...not quadalign. This is located in: 1. machine-calibration-camera lens 2. Choose upward camera2 under "
Electronics Forum | Mon Dec 06 11:33:30 EST 2010 | gantry
It has been a while but I think the Mk2 was an upgraded ballscrew. I am a fan of the Quad products but if you are looking to bring production in house using these machines to do it, I would be very very careful and really consider new machines with
Electronics Forum | Sat Dec 18 08:23:33 EST 2010 | remullis
I experienced warpage on a 7'x 13" long board, unfortunately my oven does not have center support. I use stiffeners on both of the short ends. It fixed my problem. Some of the things I was experiencing with the warpage on the second pass were placem
Electronics Forum | Tue Dec 21 17:56:13 EST 2010 | stepheniii
Am I reading your post correctly? You will print PCBs and not populate them until up to 24 hours later? And you can assemble level 3 components at 30C and 90% humidity, you just have to pro-rate the exposure time. (I don't recommend having those con
Electronics Forum | Thu Dec 09 08:24:28 EST 2010 | toddl
Hi All, We are currently looking into purchasing a new SMT line to meet our production needs. We want everything new, from the board loader to the reflow oven. I am looking for real world pros and cons of our proposed choices. All the equipment in t
Electronics Forum | Thu Dec 16 07:55:56 EST 2010 | rgduval
Aegis Industrial Softwares CircuitCAM can import a gerber file, and allow you to establish a pick and place program from it. It can also take a scanned image of the actual board to do this. It's a moderately painful process; but it is doable. Circ
Electronics Forum | Thu Dec 16 04:14:16 EST 2010 | kemasta
Hi, I am new in this industrial. I learnt that PCB may absorb moisture and eventually caused delaminate after heat apply on it (reflow or wave). But I don't quite understand, if the PCB was keep in sealed bubble bag, and with the humidity control wit
Electronics Forum | Mon Dec 27 13:34:28 EST 2010 | ppcbs
Does anyone have any experience in printing solder paste on a 0.0065" pad? I have a requirement to attach single chips with 600 to 2400 connections. The chip has a 0.005" solder ball, 0.010 pitch. Attaching to a substrate with a 0.0065" pad. An
Electronics Forum | Wed Jan 19 11:44:47 EST 2011 | davemac62
I have a Topaz with 2 positions in the rear where component trays may be placed for limited tray component capability. There is not a lot in the manual on how to set this up. The Feeder Plate info is set up to allow Fix.tf. I have spec'd tray - fix.t
Electronics Forum | Tue Feb 01 10:34:13 EST 2011 | scotceltic
I am currently looking for a quicker more efficient way to kit our parts from pulling to the carousel to organizing feeder locations on our SMT equipment. Currently we pull our parts and place them on a rack in no particular order. (we have too many