Electronics Forum | Mon Jun 26 09:46:29 EDT 2006 | jem
My company also uses the TM8C (all feeders) with the same problem as Paul. The 0402's do exactly the same as he desribes.The SMT operators are correcting the placement data all the time when using 0402 but to no avail. Chris What do you mean by the
Electronics Forum | Tue Jun 20 10:26:07 EDT 2006 | samir
Chunks, I used to work in power electronics, and we had this design engineer who used to "blow moisture" on the high-impedance circuit and test for cleanliness. We were water washing in a OA-Water Soluble environment. He was convinced that there w
Electronics Forum | Mon Jun 19 05:11:08 EDT 2006 | WEEEsted
Hi, In our setup what we usually avoid is to use RoHS BGA on Pb process. But we use sometimes Pb transistor(4~6pins) on RoHS process, no BGA yet have been reported. Its really difficult to say about reability unless you start running some functional
Electronics Forum | Tue Jun 20 08:30:31 EDT 2006 | dougs
It's hand solder, the wires are free issued, what i'm finding is that if we keep the heat and push enough solder into the joint that the component side wets there is that much solder moved up the wire that it goes solid. this is no good as the custo
Electronics Forum | Wed Jun 21 03:45:53 EDT 2006 | emeto
Hello SMT netters, Can anyone help me with AOI algorythms. I have to find out the differences between algorythms for recognition(black and white, grayscale, matching, golden board.....). I know all of you are using different type of AOI machines. C
Electronics Forum | Fri Jun 30 09:03:09 EDT 2006 | Frank
The manufacterer of our machine recommends 99.999%. At their presentation before we purchased the machine they showed an example of using different purity levels. When they whiched the supply to 99.99 and then to 99.95 you can visibly see the diffe
Electronics Forum | Fri Jul 07 13:20:37 EDT 2006 | fredericksr
I've seen the tool head move components if the component list isn't grouped according to size. If you group your taller components higher than the others then they will be placed later. I used to see a lot of shifting with large keyhole vias used
Electronics Forum | Thu Jul 06 03:03:56 EDT 2006 | ronalds
Thank you all for your input. The MF300S Multicore flux is rated for lead free. There is not much dross or contamination. We are using nitrogen. I've tested the boards with the curing test of IPC-TM-650. I think you're all right about the preheat.
Electronics Forum | Mon Jul 17 13:37:35 EDT 2006 | carln
Here is something I copied from Circuitnet.com. This appears to answer your question and then some... http://www.circuitnet.com/experts/ Ask the Experts Jul 17, 2006 What type of cleaner method is preferred for lead-free stencils? What type of s
Electronics Forum | Sun Sep 17 21:05:24 EDT 2006 | kenneth_lee
Hi, CK, I am kenneth from SMT resources Pte Ltd. Our company sell Steacil Cleaner CONTEK - CT-2000,(Full preumatic). Advantages: -More safety compare with using Electric. -Very easy to use. -Lower prices with high performance. -Able to clean stenc
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477