Electronics Forum | Thu Nov 05 07:54:40 EST 2009 | jeffreyj
gregp - that's the main problem I am having here: there is so little basic information available about these machines. It's almost like the sellers intentionally put as little information as possible in their listings on this site, equipmatching, etc
Electronics Forum | Sat Jan 22 16:39:26 EST 2011 | eadthem
Your typical high mix line would consist of, Stencil printer, 1-2 foot conveyor belt, fast PNP machine (say a universal 30 spindle turret lightning head), 1-2 foot conveyor belt, large/heavy part PNP (say a universal flex jet 7 spindle or 4 Spindle),
Electronics Forum | Thu Nov 17 22:30:01 EST 2011 | olddog
Hi again Bob, I'll go by your item numbers: 1. OK, I'll not worry about it. 2. Somehow, it seems to me that it must be doing something or in Run Step Placements there wouldn't be different behavior for Alignment type 0 vs. other settings. I know I'
Electronics Forum | Thu Apr 11 10:17:17 EDT 2013 | ericrr
Some times the PCB manufacture sends PCB panels with bad circuits, there are three ways to make these PCB without placing parts on the bad circuit, Well two in fact plus my method. (1) Placing a light mark on a dark background (or reverse) then the
Electronics Forum | Fri Mar 13 15:09:20 EDT 2015 | marcelorotofrance
Hello everybody Lately our machine has been working pretty well, but it can’t last too long. Now, during this week’s production cycle, it began to increase the component’s reject rate to alarming levels (obviously the operators reported me when the m
Electronics Forum | Fri May 11 16:06:09 EDT 2018 | aj
answers: The software on these machines is kinda flakey and the manuals are almost useless. There are a lot of bugs in the vision software that bite you. I supported mirea/meridian equipment at a past job and my memory is a bit fuzzy, but here are
Electronics Forum | Fri Aug 02 08:12:55 EDT 2019 | dfl
Hey guys, I'm using my Quad IV-c for a while now and I already manage to run some batches, but I never used the "Quad Align" feature before, since almost all my boards are 1206 parts, that doesn´t need a ton of precision to align. Anyway,
Electronics Forum | Mon Aug 17 02:57:47 EDT 1998 | Bob Willis
| | Looking for Suppliers of surface mount wetting balance equipment. | Bucky: Section 6 of the ANSI/J-STD-002 specification lists wetting balance suppliers. Dave F I like and continue to use the Multicore system. I have had many ours using the sys
Electronics Forum | Mon Jan 22 15:51:46 EST 2001 | aiscorp
TransCollaborative Manufacturing software (TCM) is involved in virtually all events flowing from receipt of CAD and BOM data, to procurement of components, to conversion into useful information, and finally to the production of actual product Consid
Electronics Forum | Tue Dec 07 14:21:41 EST 1999 | Brian W.
In my experience, the most commonly accepted theory is that 100% inspection is only 80% effective AT BEST. That means that if your inspoectors are happy, noy outside concerns, well-rested, etc, they will catch 80% of the defects. This number goes d
.gif)
