Electronics Forum | Thu Jan 12 18:42:32 EST 2023 | donovan03608
Hi All, Does anyone have any idea what tech is used to make the flex interconnect here? I was thinking hotbar, but the pitch is probably much too fine for that. https://www.cnet.com/tech/home-entertainment/the-future-of-screens-is-so-top-secret-i-c
Electronics Forum | Fri Mar 17 14:59:50 EDT 2023 | proceng1
OK, does your axis screw have the flex coupler or the magnetic coupler? Which axis is it? Did you turn off soft limits? If it's out of range, soft limits won't let it move by controls. I need to know which axis before I can get too far into this. I
Electronics Forum | Thu Oct 26 13:56:08 EDT 2000 | ptvianc
Hello: Pre-baking laminates should only be performed:(1) to meet contractual agreements or (2) in response to an actual defect that can be traced to PWB water absortion. Besides the fact that a pre-bake is an enormous process "bottleneck," it also
Electronics Forum | Tue Oct 20 10:57:18 EDT 1998 | Craig Ramsey
Dear Bob, The Tessera microBGA technology defines a family of CSP devices. The most common microBGA type is the TV46 that has been selected by Intel for use with their flash memory devices. A microBGA package in general consists of the silicon die
Electronics Forum | Wed Sep 16 07:18:20 EDT 1998 | smd
We're getting new SMT equipment! A flex machine and conveyors to boot. We have Simplimatic equipment now but I'm wondering about Lynx (I have the strong impression that Philips wants to deal) or this D-pace company? What's the 411 on these guys? Equ
Electronics Forum | Mon Jul 29 09:19:00 EDT 2002 | pjc
Quick Change Tooling is one advantage for DEK when comparing the MPM UP2000. DEK has Form Flex. Good system, but I've heard concerns about long term dependabilty. All support tooling options offered on the UP2000 takes a bit of time to set up. So, If
Electronics Forum | Fri Oct 03 08:58:22 EDT 2003 | SMT Process
Folks, I use both UP1500 and AccuFlex. The basis for this machine was bought from SMTech several years ago as the SMTech 500. They sold off the last few SMTech machines with the MPM name on them (stupid move because they sucked), but then quickly r
Electronics Forum | Fri May 14 11:17:42 EDT 2004 | Ashok Dhawan
I am having coating adhesion problem with flex circuits. The cover plate material is KAPTON or Poly imide. The conformal coating material used is humiseal 2A64. The boards are cleaned, measuring less than 4 microgram Nacl per sq in. against acceptabl
Electronics Forum | Wed Apr 04 14:29:16 EDT 2007 | rgduval
Anyone have experience wave soldering rigid flex assemblies? I've just picked up a new job from a customer; it's a rebuild for the company, but new to me. The customer had previously taken their business elsewhere due to delamination problems with
Electronics Forum | Tue Nov 01 12:33:26 EDT 2011 | davef
snip Dear Reader, Five years of ground-breaking innovation at blazing speeds in the realm of flex circuits has culminated in the publication of Flexible Circuit Technology, 4th Edition. Joseph Fjelstad, a world-renowned expert in the field and a 40
