Electronics Forum | Thu Mar 08 09:00:50 EST 2007 | Rob
Thanks for the answers. Hi Dave, I'd love to use some of the durastone we have here, or some Durapol or Delmat (never used Glastic before though), however we need a compliant material for the blade to go into slightly, otherwise they tend to snap or
Electronics Forum | Tue Mar 06 08:33:40 EST 2007 | cardinal
You can get a topside edge-clamping system to fit your AP HI E printer from Gridlok. They make a universal tooling system and topside edgeclamping system for the AP series and UP 2000 series printers. The Y snugger tooling option when ordered with t
Electronics Forum | Mon Mar 05 07:59:11 EST 2007 | jdengler
Mark, I will begin by saying I am a big fan of Fuji equipment so I would not recommend anything else if you already know them. You say you get 70K placements a month with these 2 lines? Do you mean 70K boards a month? The first place to look a
Electronics Forum | Tue Mar 06 13:14:55 EST 2007 | stepheniii
I personaly have used both and for where I am currently Mydata is best for us. However I agree with the stick with what you know suggestion. Go Fuji. Make sure your management isn't looking at Mydata for fast changeovers. Process is the main facto
Electronics Forum | Mon Mar 05 15:29:50 EST 2007 | ck_the_flip
When no-clean flux and no-clean soldering first came out in the late 80's / early 90's, there were lots of White Papers written about conformal coating adhesion and no-clean flux. I'm pretty sure all CC's will adhere to today's chemistries. To be o
Electronics Forum | Sun Mar 04 20:06:46 EST 2007 | alphamoose
Hey Guys, We are looking to set up a line to manufacture low volume high mix PCBs. We have work in the display technology and military sectors. Part tracking, lot tracking are critical. The machine may also end up in a class 10,000 or 1000 clean room
Electronics Forum | Mon Mar 05 15:59:39 EST 2007 | jasont
Have you considered used equipment? We have several options you may want to consider; - 1999 MPM UP 2000/A HiE + 2003 UIC HSP 4797L + 1999 UIC GSM2 - 1997 Panasonic SPPV + 1997 or 2000 Panasonic MV2F + 1996 MPA-3F - 1998 Dek 265 GSX + 2001 Siemen
Electronics Forum | Fri Mar 09 13:57:05 EST 2007 | gregp
I must have missed your booth. Oh, that's right...you didn't have one. Only the "real" scum of the earth equipment brokers were there. I guess you're not quite there yet. What cracks me up is how the parasites that never created a product before
Electronics Forum | Mon Mar 12 04:13:05 EDT 2007 | Rob
Hi Greg, I only wheel it out periodically when you go for a seasonal bout of free advertising! It was a compromise trying to be all things to all people, whilst fitting in with electric cycle legislation to avoid the age barriers and car requiremen
Electronics Forum | Tue Mar 13 00:02:45 EDT 2007 | grantp
Hi, That's great, and there are better ways to advertise, such as banner adds, and trade shows etc. You also have no idea who I am and cannot just blow be off as someone young, as you did, so you can understand why that's annoying. Good luck with
