Electronics Forum | Mon Apr 11 08:27:10 EDT 2011 | leemeyer
I have had similar problems before where the machine will intermittently stop with a limit error. Reset the machine and away it goes. Replacing the ribbon cable that runs from the head (37 pin D-sub)has solved this problem. This cable gets flexed a l
Electronics Forum | Wed May 11 14:34:03 EDT 2011 | thejedeye
Google, Documents, spread sheet, public access. Or try a DropBox account. This is an invite link. http://db.tt/5UBwDPV NOTE:FYI:if you use the link and join I get 250 Mb more storage. There are other types like it out there, a customer has such
Electronics Forum | Tue Apr 19 10:19:28 EDT 2011 | leemeyer
We currently have a job that uses press fit solderless pins. The pins are custom and only supplied in bulk packaging. I am looking for a machine that can orient the pins and present them to my insertion machine. Of course i need the pin to be present
Electronics Forum | Mon May 02 15:36:40 EDT 2011 | marcpeo
One more note on this. The techs tell me that the main reason for the PV immediately matching the Set Point is that the software is in "Edit Mode". This is a mode that allows one to iterate the software without the oven running. That might also ex
Electronics Forum | Thu Apr 28 17:02:07 EDT 2011 | grasso1976
Has anyone had success utilizing the lifted lead/ height checker feature on a Mirtec MV-7L. We recently had two separate events where the machine did not detect a lifted lead using the ic/bridge inspector. The soldering results came back with out def
Electronics Forum | Thu May 05 08:14:45 EDT 2011 | kahrpr
Where black pad exists, it is not a common problem. When I read it is totally random I doubt that. You have defiantly something going on that is unique with the process. It is either your board manufacturer or your solder paste or your profile. It c
Electronics Forum | Wed May 04 21:32:30 EDT 2011 | jimlas53
Thanks for the answer, RLM, I couldn't find anything in the manual that was helpful. If I use a common extent for each component type, I need to identify those components that may be turned due to the feed type (tape, vibe). Is this where I would d
Electronics Forum | Fri Jun 03 14:33:16 EDT 2011 | sunrotor
Amen... Until the process is designed, documented, employees trained and proficient, equipment maintained and calibrated, parts issues resolved, programming corrected, attitudes adjusted, and timetables reasonable, there is no need to tweak the inspe
Electronics Forum | Fri May 27 05:16:28 EDT 2011 | aj
Hi, There are quite a few suppliers so you could have a lot of work on your hands trying them all. Do a bit of research finding out what paste all the big guns use? they spend a fortune doing evaluations etc But you should get at least 3 different
Electronics Forum | Wed Jun 08 01:45:53 EDT 2011 | aoiguy
Update: I was able to import the csv pick & place data that was given, issue is that the data fails to over write the insert cords that have already been given with the cad data. Can not load the csv data without the first (cad) file loaded, so there
.gif)
