Electronics Forum | Thu Sep 11 12:53:47 EDT 2008 | chiptargets
Hi, We have recently bought a Genrad Pilot S20 for our analysis lab. The equipment worked before it was sent to us. However, after receiving it, we were able to power up but with multiple error. Since we don't have any experience running the flyi
Electronics Forum | Fri Sep 12 08:32:44 EDT 2008 | pjc
Its actually a Seica machine. GenRad just labeled it. Teradyne/GenRad no longer supports the system. Go directly to Seica, http://www.seica.com , they are an Italian company with offices around the world. There is one in Nashua NH. Some 3rd party o
Electronics Forum | Sun Sep 14 06:37:11 EDT 2008 | johnjohn
Hi All, I am trying to work out the OEE of my NXT equipment to IPC. I am presently trying to work out what metrics I need can anyone help me with this. I think I need the following Machine rating IPC 70% of machine rating, cycle time, What I am tr
Electronics Forum | Tue Sep 16 16:03:43 EDT 2008 | vladig
Well, typical content of Pb in Sn/Pb polating is a few percent (just to mitigate Sn whiskers growth). Therefore, the lead finished with SAC305 won't be much different from those finished with Sn/Pb. You can make one or two cross-sections for sanity c
Electronics Forum | Tue Sep 16 16:45:44 EDT 2008 | trynders
Thanks for the response! I thought is was odd the component vendor chose SAC for a lead frame finish. I am in the Military world, and things have been difficult to control from a lead-free standpoint. I have not been able to find any studies on SAC
Electronics Forum | Tue Sep 16 09:26:26 EDT 2008 | mi
Hello, I have programmed SMT placement for Mydata My9 machines. I have ported programs between Mydata-to-Mydata machines. Also from Mydata to AOI machine for SMT inspection. Is there a way to port a placement program from Mydata to Panasonic MSH2
Electronics Forum | Sat Sep 20 18:54:14 EDT 2008 | jlawson
There is software available like valors new vPlan, single point solution, can support Mydata and Panasonic machines - can convert programs in both directions. ALso has all the Gerber, EDA import, BOM import merge - compare, plus many other advanced f
Electronics Forum | Tue Sep 16 09:35:12 EDT 2008 | babe7362000
Can anyone tell me if there is a procedure for storing raw PCB's? We currently are seeing an issue with lead free boards with dewetting. We tracked it down to one or two datecodes, but not all of the boards have dewetting. Is there a expiration da
Electronics Forum | Tue Sep 16 19:13:28 EDT 2008 | hegemon
Our Mirtec MV3 Benchtop machine came with its own table. Others may or may not. During our evaluation of AOI machines we had 2 other units set up on standard workbenches at times. A solid, shake free table is a MUST, the heavier the better. There i
Electronics Forum | Wed Sep 17 10:39:19 EDT 2008 | daxman
Hey Bwelch, We use the Marantz Nspec 22x (similar to the DL-14) table top AOI here and it's great. No need to bolt it down or attach it to a heavy table; the g-forces are extremely minimal and the machine still operates quickly. 1 guy can pick up t
