Electronics Forum | Sat Sep 29 02:58:18 EDT 2012 | ericrr
I tried to look for "H890" on Internet and went nuts, (Thanks to Google) I would think H890 is part of a diode manufacturer part number. Have you tested it for a diode function? or maybe you have this is why you want a replacement. Tantalum capacito
Electronics Forum | Fri Oct 19 16:02:20 EDT 2012 | davef
Hi Phil ... Here's a response from Heller Industries ... If I understand correctly you want to tight the tolerance window between set point and present value. Actually you can do so by lower down the warning band to 5C which is default 15C. Please
Electronics Forum | Thu Nov 08 12:50:22 EST 2012 | jmartens1978
I have a project that I am working on and would like some input from anyone that has some knowledge on High Voltage Arcing on PCBs. Problem: I have a PCB that is enclosed in a plastic enclosure that has metal pins and switch that extend to the outs
Electronics Forum | Sat Dec 01 14:23:52 EST 2012 | davef
Post your equipment wants here: http://www.smtnet.com/mart/ Further, links to equipment resellers are posted on that page Used equipment resellers that support SMTnet are: * IBE SMT Equipment , 318 Corporate Woods Dr, Magnolia, TX 77354; (800) 353
Electronics Forum | Fri Jan 25 07:56:08 EST 2013 | pgarsoe
Reuters 6:13 a.m. CST, January 25, 2013 A device seen as key to explaining why a Boeing Co. 787 Dreamliner jet made an emergency landing in Japan last week is burnt and unlikely to provide safety inspectors with data they need, said a person with kn
Electronics Forum | Fri Feb 01 08:11:43 EST 2013 | bdamico
Hello Phase1, Depending upon where you purchased your system, chances are that you are running a very old version of software and that the MIL library is also out of date. This will have a big impact on the functionality of your MIRTEC machine. I t
Electronics Forum | Wed Feb 06 13:45:39 EST 2013 | phase1
Is there alot more to training than what the manuals spec out? The machine came with training outlines that seem to be a condensed form for programming everything from chips to fine pitch etc. Im not sure if this doccument came from Mirtec or the com
Electronics Forum | Wed Feb 13 07:00:59 EST 2013 | spoiltforchoice
Low-Medium volume and Low Budget are difficult for others to quantify. I'm not familiar with GEM's but if the AX-201 suggested above can use your existing feeders its obviously got a leg up on the competition. Otherwise, to some extent your choice mi
Electronics Forum | Wed Feb 13 09:04:33 EST 2013 | rgduval
Thanks, Dave. One thing that's beginning to concern me about the tankless heaters is their capabilities to get the water to the right temperature, at the right flow rate. It would be too easy to know the actual flow rate of the wash machine I bou
Electronics Forum | Sat Feb 23 16:49:49 EST 2013 | joeherz
Appendix A2 of the standard says: ----------------------------------- B. Temperature controlled soldering equipment (at rest) should be controlled within +/- S'C [+/- 9'F] of the idle tip temperature. Constant output (steady output) tools in compli