Electronics Forum | Thu Sep 07 11:24:21 EDT 2017 | slthomas
HI Tsvetan, Can you tell me what material your stencil was fabbed from? I have seen (from different suppliers) references to at least 3 different grain sizes of stainless for laser cut, plus electroformed nickel for laser cut, electroformed nickel,
Electronics Forum | Fri Sep 15 04:09:15 EDT 2017 | philc
Yageo announced their decision to stop marking SMD resistors back in 2013, and since then we have started to see 0603's that aren't marked, but larger sizes - so far - are still showing a value. 0402's have never been marked, and I doubt they ever w
Electronics Forum | Mon Oct 30 12:07:42 EDT 2017 | slthomas
One thing that most of the sites I've worked in did NOT have was a room dedicated to SMT and the result is almost always a potentially dirty environment, even if you try hard to keep it clean. The one place I worked where they built a room specific
Electronics Forum | Tue Oct 17 12:12:10 EDT 2017 | dustind19871
I know I have seen several old threads about this screen printer. I was curious if there was anyone out there that had any luck tracking anything down parts or info wise about these printers. I have one and I am trying to source the correct timing b
Electronics Forum | Thu Oct 26 12:14:34 EDT 2017 | lefwan
Our DEK 265 machine is showing this error message during starting…than it keeps re-starting in endless loops: Diskette drive failure on drive A Fixed Disk Controller Failure Fast ready check - Version 1.0 Copyright Arcom Control Systems Ltd. CMOS
Electronics Forum | Wed Nov 01 11:51:13 EDT 2017 | spoiltforchoice
I don't think you will find any of that out there and freely available. As I recall MyData was one of those manufacturers who insist you do their training at their facility which limits the ability for the material to escape into the wild. I would su
Electronics Forum | Mon Dec 04 08:43:39 EST 2017 | bandjwet
If you are looking to rework (after all of the previous suggestions are taken and tried....you have some solid ones in there). When a device like this is placed and is hard to get to we use the 7721 bumping process using a controlled heat source (no
Electronics Forum | Mon Nov 20 12:36:42 EST 2017 | emeto
Hi, there are several things that I see here. 1. Part is saying misaligned on the top blue bar and missing on the initial list. 2. Part is neither misaligned, neither missing - it is wrong value. 3. How is your part thought? How many inspection wind
Electronics Forum | Thu Jan 04 02:40:55 EST 2018 | buckcho
hello, my colleague ProcEng1 is right. The main problems are the gears, which easily are stuck with foil, the shutter, which has to be lubricated and not bend. Air cylinders on the machine have to be changed if you have misfeeds still. They look pret
Electronics Forum | Mon Nov 20 15:10:56 EST 2017 | bstogsdill
Aerospace/military application- we have recently installed an SMT line. Our prior cleaning of RMA flux was Isopropyl Alcohol only, but with the reflow oven on line, the flux is now baked on. I am looking into FLUX OFF cleaner for removal of t