Electronics Forum | Tue Feb 12 10:55:42 EST 2013 | marcelorotofrance
I didn't knew about this procedure because it doesn't appears in the manuals I have. These are not originals but incomplete photocopies (this is one of many problems of this machine) that I have compiled from other colleagues. I jus received just som
Electronics Forum | Fri Feb 15 12:51:30 EST 2013 | emeto
Hi MikeS, I didn't post all the information, because I didn't want to mislead you. I wanted to see your way. We tried 3mil and 4 mil stencil using type 4 paste. It was hard to get the right aspect ratio and that;s why we did it on Nickel stencil - a
Electronics Forum | Fri Feb 15 05:36:07 EST 2013 | adrianus
Hi Dave, We do not reflow those parts but are merely a supplier. Therefore I need to have our application specs in order. So, in case the customer has a problem I want to be able to properly support the customer. Hence, I'm curious about the details
Electronics Forum | Fri Mar 01 03:16:01 EST 2013 | grahamcooper22
Solder paste flux formulation can make a difference when soldering to nickel silver...due to the alloy containing metals that oxidise easily like zinc and nickel then the flux has to be able to cope with the surface oxidation when the parts are in th
Electronics Forum | Fri Mar 29 16:29:16 EDT 2013 | aemery
Worked on these for many years as a Speedline FSE, now doing my own thing. You could have motion or alignment issues in the printhead. The setting in the INI could be wrong, but unlikely. Or are you just using the wrong squeegees. Without a stenc
Electronics Forum | Thu Feb 21 08:20:43 EST 2013 | cowens
Thank you so much. We actually did get the machine up and running yesterday morning. We switched the theta and the transport driver cards and it is working now. We have had the connectors burn on us in the past and replaced them. I am hoping the prob
Electronics Forum | Fri Feb 15 14:38:59 EST 2013 | bmario
Hi, We are having a problem with the interpretation of the surface evaluation criteria of J-STD-003 section 4.2.2.4.2. "A minimum of 95% of each of the surfaces (i.e. each pad) being tested shall exhibit good wetting. The balance of the surface may
Electronics Forum | Sat Feb 16 22:19:11 EST 2013 | mdang
Hi, I bought a fuji Flexa v4.6.0.7 and hook it hook it up with CP65 machine. The flexa system already have CP65 configure so I can see the production program on the machine and delete them but I can not transmit a new program to the machine. It error
Electronics Forum | Mon Feb 18 13:53:44 EST 2013 | cbeneat
We have some Vectorguard stencils and frames. I am having issues with one of the frames. And need a little guidance. A stencil is on the frame, and we can't get it off, the operator heard a pop while putting the stencil on the frame, now we hear a
Electronics Forum | Tue Feb 19 11:43:52 EST 2013 | markhoch
I'm not sure of the timeframe with which you have to work, but I'd consider sending the frame and mounted stencil back to DEK for repair. I'm not a huge fan of these systems, because I believe consistancy in the process is critical, and these system
