Electronics Forum | Wed Apr 24 12:55:26 EDT 2013 | markhoch
Our Safety Committee has tagged the Fixture Changeover process as potentially unsafe due to the weight of our ICT Test Fixtures. (They range from 40-60lbs each) I've been tasked with investigating a lift, (aka a "cherry picker"), to assist in loadin
Electronics Forum | Mon Apr 29 01:29:29 EDT 2013 | aemery
If your current problem with the conveyor speed was caused by the SMEMA issue, maybe you have a Board #1 problem. The SMEMA communicates to the computer through Board #1. The input signal from the speed encoder and the output analog voltage to the
Electronics Forum | Thu Apr 25 09:57:31 EDT 2013 | jaimebc
We aquired an ERSA ECOSELECT 2 selective soldering machine. So we are going through a learning curve and I would like to hear from ERSA users on this subject. The main concern is to keep the miniwave steady, it seems that it " bounces" a lot and is
Electronics Forum | Thu Apr 25 22:41:24 EDT 2013 | jaimebc
Evtimov, thanks for your reply. Yesterday was our first day of running 99.999%. We were running for weeks with 99.99% Nitrogen purity and we just were having all kinds of problems with the miniwave not being consistent. We had a wave offsets at 75,
Electronics Forum | Thu Apr 25 22:42:06 EDT 2013 | jaimebc
Evtimov, thanks for your reply. Yesterday was our first day of running 99.999%. We were running for weeks with 99.99% Nitrogen purity and we just were having all kinds of problems with the miniwave not being consistent. We had a wave offsets at 75,
Electronics Forum | Wed May 01 11:31:38 EDT 2013 | jaimebc
Stephen, Bill, Thaks for your input. We are currently waiting for nozzles since the ones we have are badly oxidized. We do have a deoxidizing gel that we got from ERSA, not sure if it contains Adipic Acid, but it is what was suggested we used. Once
Electronics Forum | Thu May 02 14:58:20 EDT 2013 | stephendo
Kurtz had a guy that was great with the machine. I strongly suggest that you watch the wave height test a few times in the morning then at lunch and at the end of the day. Look where the solder goes up to on the probe. If it doesn't work consistent
Electronics Forum | Tue Apr 30 10:03:31 EDT 2013 | mmjm_1099
Got it powered back on Friday.... We did check the UPS (power-supply)and indeed it was bad. So we referenced the manual and found you can bypass the UPS all together. So we just directly plugged the machine past the UPS. Well the machine is running b
Electronics Forum | Tue Apr 30 12:20:52 EDT 2013 | deanm
We are using a Zebra S4M (soon to be discontinued) for our larger labels, not for PCBs. For very small labels that would fit well on a PCB, we use a Brady BMP71 which is small, versatile and does not require a PC. If you are running mid to larger vol
Electronics Forum | Mon May 06 05:32:39 EDT 2013 | pavel_murtishev
Jim, Thank you for the input. Could you please check your standard filter pore size? A model number would be valuable. How many shop volumes (in cubic meters) do you pump per hour? Customer is seriously thinking over installing AC system similar to