Electronics Forum | Mon Dec 29 16:49:57 EST 2014 | emanuel
Hi Rob, I am writing this reply as an update. Unfortunately I got your recommendation a bit too late, I contacted Count-On Tools and ordered from them a custom made nozzle for the Emerald. $300 paid for the "pleasure", everything could be OK if it w
Electronics Forum | Tue Oct 14 19:11:44 EDT 2014 | caurbach
We have a 6622CC machine for SnPb boards. A few things you may want to try: - Solderability testing on the components/PCB. - If the fuse holders or copper in the board are sucking up all the heat, try increasing preheat. Some fluxes (like the WS f
Electronics Forum | Wed Oct 15 23:41:34 EDT 2014 | padawanlinuxero
Hello Chris I had a similar problem, what work for us was a combination of fluxer and preheat, we try different approaches what work was high pressure and a low traverse speed, and really heating up the upper part of the board, you see we need to u
Electronics Forum | Thu Oct 09 17:37:58 EDT 2014 | rgduval
Got a failure while starting up our GSM, and hoping you guys have an easy fix that we're not seeing. We're getting a Timeout waiting for nozzle changer vacuum buildup. It seems to be occurring on head 2, during nozzle change. We've reseated all of
Electronics Forum | Fri Oct 10 16:23:59 EDT 2014 | dilogic
First, plug all holes with nozzles or plugs. Then use I/O diagnostics to fire changer up and activate vacuum. Then try to remove each of the nozzles and see if the vacuumm holds. If it does, check vacuum detector switch (mounted on changer side). The
Electronics Forum | Tue Oct 14 09:20:04 EDT 2014 | rgduval
Thanks, Deni, I discovered the servo control box, but, noticed that it was a sealed unit (and a third party unit, at that)! I wasn't sure if I should muck about with digging into it. But...now that you've identified the driver slots for me, we mig
Electronics Forum | Thu Oct 23 09:40:31 EDT 2014 | rgduval
Thanks, George. Yep, we got through all of that. Then went to cleaning the nozzle changers, etc. Had a tech in the other day from the broker that we bought the machine from, and discovered that the problem in changer 4 is that we don't have any
Electronics Forum | Thu Oct 09 17:50:39 EDT 2014 | joe98375
Greetings, We have a very old IC insertion machine mentioned in the subject line. The system seems to have lost all communication between the computer and the machine. The connections between them are good and I do not see any signs of electrical da
Electronics Forum | Sun Oct 12 22:08:34 EDT 2014 | cusackmusic
I just got a used AP/C which I guess is also called an AP25? After fixing a few obvious issues, I powered it up, and get a hardware limit error. I have verified that none of the axis are near their limits. Without a manual, I'm not sure where to go
Electronics Forum | Tue Oct 14 11:45:19 EDT 2014 | tombstonesmt
Scan Reel> THEN Verification system requires scan of reels directly to the right and left previously performed verification. Maybe even a timer to allow splice. It's difficult to achieve successful training when an operator is constantly told what t
