Electronics Forum | Wed Apr 02 19:28:06 EDT 2014 | rboguski
We have had a Dage XD7600NT Ruby for about two years. We were one of the first in North America to purchase it with the X-Plane Technology. We concur with the previous post that it is primarily a manual system. Dage offers step-and-repeat features
Electronics Forum | Fri Apr 04 15:39:27 EDT 2014 | davef
I’m not going to do your job for you. Here are some links to get you started: * http://www.fda.gov/ICECI/Inspections/InspectionGuides/InspectionTechnicalGuides/ucm081273.htm * http://www.instructables.com/answers/how-to-identify-the-leakage-of-elect
Electronics Forum | Fri Apr 04 18:16:43 EDT 2014 | garym4569
We are in the process of launching a new product and found reflow solder issue with one of the inductors. I have set oven profile to paste specifications. I just finished profiling with thermocouple under problem component. All other components ex
Electronics Forum | Sat Apr 05 13:04:33 EDT 2014 | horchak
237C max is on the low end for SAC305, especially if you have heavy leaded components. I always went with 245C and above depending on the board design. I noticed the electrolytic caps. You need to check max temp with the manufacture on those. When I
Electronics Forum | Tue Apr 08 04:05:35 EDT 2014 | eoghan
Hi, I have been tasked with getting a Jot router back working, but have none of the accompanying documentation. When machine is powered up the user interface monitor does not turn on, although it does have some power going to it because I can see th
Electronics Forum | Fri Apr 11 15:14:36 EDT 2014 | superlen
CP45 as fast and error-free as possible, but it's tightly integrated to our MRP backend and not easily separated. It also doesn't let you pull back out the optimized feeder list as I haven't tried to reverse engineer the .pcb or .opt file. I've looke
Electronics Forum | Sun Apr 13 02:36:06 EDT 2014 | alexeis
Hi, We have system called Setup Center for Samsung that can give a solution to your needs. It loads samsung files, including before and after optimization, and gives you feeder list splitted by machine and side (Front/Rear). Also, you can go over on
Electronics Forum | Thu Apr 17 14:01:26 EDT 2014 | hegemon
And digging a bit further, are the opens at the device level (all the solder on PWB pad, none on device pad) or at the PWB (similar to pillow defect?) After answering that, I would start thinking about(in this order)paste print quality and consisten
Electronics Forum | Wed Apr 30 11:28:38 EDT 2014 | nhubble
If you still are considering these PoP opens a possible warpage issue I might be able to help. I work for a company that measures warpage during heating (Akrometrix). I'll try and send you a message with details. I would be curious to hear if this
Electronics Forum | Mon Apr 14 15:37:00 EDT 2014 | jdenuzzia
If you do a search on Reflow Oven Cleaning Fluid, you will find links to companies and chemicals that can assist you. I recommend that you contact one or more of the companies and discuss your needs and the paste you are using. They should be able t
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, China
Phone: +86-138-29839112