Electronics Forum | Wed Aug 31 17:12:23 EDT 2016 | ttheis
Yeah, it's set to use SMEMA for down line. I have the conveyor conected to downline fmi on up500 (right side of machine,) but the Upline Ready light is activated on the up500 when the conveyor is ready and not the downline like I would expect to see.
Electronics Forum | Thu Sep 01 12:07:35 EDT 2016 | pavel_murtishev
Is there any field proven spray cleaning technique able to remove flux residues under OSRAM LEDs? Is it possible in principle? The problem is that OSRAM LEDs are low standoff ones and I absolutely have no idea how cleaning agent could get there. Mo
Electronics Forum | Thu Sep 08 12:37:55 EDT 2016 | mmjm_1099
We stated placing labels on our lines for a couple years now and over the past year it has really taken off. Hover-Davis is the place you need to contact in order to get the correct feeder for your machines. They will want a single column label with
Electronics Forum | Thu Sep 08 22:39:20 EDT 2016 | ttheis
Here's an idea; buy a pcb conveyor and design a simple label applicator to mount to it. Maybe replace the logic with your own or replace the PLC in the conveyor with your own solution. Shouldn't be much more than a few sensors and and a stepper motor
Electronics Forum | Fri Sep 09 11:09:16 EDT 2016 | capse
Full disclosure; I represent ASYS in the southeastern US. Depending on PCB size and mark requirements you can get a laser marker for under $100,000. It can be set up as an island to mark batches of PCB prior to them going to the assembly line. ASYS a
Electronics Forum | Thu Sep 08 13:14:11 EDT 2016 | claudea2
Hello, we have an Ekra E4 that we bought used and the stencil wipe never worked. We found that the air tubing for the up (black)& down (blue) of the wipe roll is missing. There are 2 push connectors for up and 2 for down to receive the tubes. Does an
Electronics Forum | Tue Sep 13 10:00:27 EDT 2016 | awhite
Switched out the mech. relay on the board loader, no change. Same behavior. Could not find a mech. relay on the printer... SMEMA wiring appears go directly to a PCB. And it is at that point that I run out of talent. If the machine weren't dedicate
Electronics Forum | Sun Sep 18 10:40:19 EDT 2016 | sarason
First of all do a database or a spreadsheet with all the components and relavant details. Date codes, manufacturer. Abbreviated part no., Full part no, description, Then you can put them online on your own website. You may find a few sales of your de
Electronics Forum | Thu Sep 15 09:31:02 EDT 2016 | ladmo1
While removing one part, another part - BGA part - several components away, actually melted on one corner - you can see the plastic body of the part oozing out around one corner between the solder balls. Several of the solder balls on the one corner
Electronics Forum | Mon Sep 19 01:57:28 EDT 2016 | shriram
Hi guys, Problem: Mid chip solder balling. Component affected: 0603 caps only Defect is PCB specific (Meaning only one PCB is affected as the aperture is standard for that component). As a containment I'll give a home plate design for the compo
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, China
Phone: +86-138-29839112
