Electronics Forum | Tue Apr 07 21:56:32 EDT 2009 | davef
electrovert bravo 4050 to find things like: Cookson Electronics News, ISSUE #6 � SUMMER 2002, High Temperature Bravo� 4050 Reflow Oven Available: ELECTROVERT� has introduced a new high temperature reflow soldering system designed for producing lead
Electronics Forum | Thu Nov 05 07:54:40 EST 2009 | jeffreyj
gregp - that's the main problem I am having here: there is so little basic information available about these machines. It's almost like the sellers intentionally put as little information as possible in their listings on this site, equipmatching, etc
Electronics Forum | Tue Aug 31 18:34:32 EDT 2010 | aqueous
If the batch cleaner is truly closed loop, then 100% of all of the process fluid (water) is captured, filtered (particulate, carbon, resin) and reused. This answer is based on a traditional closed-loop batch cleaning system with an integrated water
Electronics Forum | Mon Jan 10 18:35:05 EST 2011 | eadthem
Ive used a Mirtec machine for 3 years MV3L with side angle inspection. Mirtec has some issues documentation, and repair plus. But there machine is impressive and the AOI software is good. We can find about 90-99.99% of all errors using just the 5
Electronics Forum | Fri Sep 09 21:09:20 EDT 2011 | hegemon
Wow, a lot of questions here...and you are definitely doing some "tough sledding". To the point. If you have 3 - 22" zones you'll have to calc your belt speed and temperatures to match the solder paste requirements with regard to flux activation an
Electronics Forum | Thu Sep 29 10:21:11 EDT 2011 | davef
1. Floor loading requirement - The designer of your factory building specified the flooring with a certain floor loading capability. You need to determine that capability. You plan to install machines and equipment. You need to determine the weight o
Electronics Forum | Sat Aug 18 22:43:14 EDT 2012 | eadthem
we service all of our lightning spindles once a year, Take the spinldes off. loosen the screw by the nylon cap and slide the locking pin out. run the spindle shaft, the nylon cap and pin assembly , and spring thrue a ultrasonic cleaner with 99% is
Electronics Forum | Thu Oct 18 15:03:48 EDT 2012 | rway
2) Start with the PLC. What do the indicator lights tell you. Is your entry sensor working? Your PLC has status lights that should go on/off with the input/output conveyors. Can you be more specific about "not operational?" This is a broad stat
Electronics Forum | Thu Apr 11 10:17:17 EDT 2013 | ericrr
Some times the PCB manufacture sends PCB panels with bad circuits, there are three ways to make these PCB without placing parts on the bad circuit, Well two in fact plus my method. (1) Placing a light mark on a dark background (or reverse) then the
Electronics Forum | Wed Feb 12 16:48:31 EST 2014 | gmcquoid
We are having an internal debate here related to minimum Conductor Width. Can you have your QA manager review this and advise. IPC-6012C-2010 3.5.1 Conductor Width and Thickness When not specified on the master drawing the minimum conductor width s