Electronics Forum | Fri Feb 23 12:24:59 EST 2001 | traviss
200-300u that�s tinny but I read IPC as saying ANY metal other than gold in the critical contact areas is not acceptable.
Electronics Forum | Mon May 07 17:17:09 EDT 2001 | davef
500 insertions � 50 m gold => 300 insertions � 30 m gold => 50 to 75 insertions � 20 m gold => 10 insertions.
Electronics Forum | Sat Jun 09 06:34:36 EDT 2001 | Eyal Dickerman
Hello Wehave very good results with CyberOptic LSM300 with SPC software (applied..) Eyal
Electronics Forum | Wed Jun 27 21:05:48 EDT 2001 | davef
BGA Cycle 1: solder ball attach. BGA Cycle 2: BGA attach to board. BGA Cycle 3: BGA removal from board. BGA Cycle 4: BGA pad dress. BGA Cycle 5: BGA ball replacement. BGA Cycle 6: BGA re-attach to board. Board Cycle 1: BGA attach to board. Boar
Electronics Forum | Tue Jul 10 09:47:39 EDT 2001 | vance66
Has anyone seen any reductions in printing defects due to the use of a Volumetric LSM? What are the pros and cons to Cyberoptics LSM 300?
Electronics Forum | Mon Nov 15 20:26:33 EST 1999 | Clifford Peaslee
Hello SMTneters, The move is complete. The numerical IP address is temporary, until Internic changes the name pointer which should be in a day or two. Web email should not be affected. If you find any problems, please email me. Thanks, Cliff
Electronics Forum | Wed Apr 07 16:23:01 EDT 1999 | GREG DENHAM
DOES ANY ONE KNOW HOW I CAN STRAIGHTEN BENT PINS ON A FINE PITCH QFP WITH OUT DAMAGING THE CHIP. AT $300 A CHIP I CAN'T SCRAP THEM.
Electronics Forum | Fri Dec 21 06:23:29 EST 2001 | dbrown
We are using a Sabre Max 757, supplied by Invicta UK - see http://www.invictauk.com along with Zestron SD 300. Perfect combo for paste, glue, ink etc etc
Electronics Forum | Fri Apr 19 15:52:31 EDT 2002 | davef
So, what is 'high voltage'? anywho? * We sort of use 10 kV as the starting point for 'high voltage'. * National Electrical Code defines a much lower starting point (300 or 600 V?),
Electronics Forum | Mon Jul 29 09:24:30 EDT 2002 | pjc
Its nearly impossibile to get any Gage R&R on systems that require the operator to posisition the board to be measured. For this you need an automatic measurement system. There are many vendors out there in addition to CyberOptics, models SE 200 and
