Electronics Forum | Thu Jun 29 08:41:24 EDT 2006 | russ
I agree that a BGA may be the better/easier process overall, but it is not 3 dollars per assy better, I am in agreement that you should be able to handle QFPS just as well as a BGA. PBfree BGAs do not self align BTW, so one needs to keep that in mi
Electronics Forum | Thu Jul 19 17:10:43 EDT 2007 | jamyboy
You might want to check the Xwagon bearings. We had the same issue with the TP9-UFP we ordered all the possible parts Xmotors small large, encoder, transducer, couplings etc. over 10K worth of parts. The only thing we didnt order was the actual x-wag
Electronics Forum | Fri Jul 20 07:25:51 EDT 2007 | chrispy1963
If you still have trouble with this problem try calling MyData and ask their opinion. I know this sounds simple and maybe you have tried already, but I have found in the past that there are certain techs who really know their stuff. Glen Gayton in B
Electronics Forum | Tue Feb 21 10:45:45 EST 2012 | acsscott
Thanks for the password. There is a 7 pin connector for the Emergency stop in and out. It has a mate with a jumper wire attached to the Topaz end. If you put the jumpered mating connector on this, the emergency stop errors go away. The other conn
Electronics Forum | Wed Jun 27 12:51:53 EDT 2012 | cyber_wolf
You can leave the booster in the original position and mount two small fans directly underneanth it blowing upward. By leaving it in the original upright position you get quite a bit of air velocity in the small space between the booster and the mach
Electronics Forum | Tue Sep 18 05:22:34 EDT 2012 | sarason
Try this page for the updated machine An FP-100 about 85 psi. for this model. The basic machines are near identical , just newer plastic moldings. I think I ran mine off a car inner tube and a 12V tyre pump, originally. So that would have been a
Electronics Forum | Thu Nov 07 09:06:09 EST 2013 | detecheurope
Hi Suresh, Detech Europe are a supplier of new and second user Mirae SMT pick and placement machinery in the UK. We currently have a fully refurbished Mirae MPS-1010 dual gantry chip shooter available with feeders. We can provide both installation a
Electronics Forum | Fri Jan 15 17:42:14 EST 2016 | huske
We rarely do profiling so we don't need all the new fancy stuff. But when we do I get a piece of aluminum rod and an empty reel of parts (preferably a 12" reel) fasten the thermocouples and wrap the loose end around the reel. The larger reel gives
Electronics Forum | Fri Dec 28 12:58:40 EST 2001 | cyber_wolf
We currently have 4 Mydata pick and place machines in production.(1)TP-9 ,(2)TP-11's,and a new MY-12 machine. We run 3 shifts five days a week, and we also have a weekend shift. We seem to bend alot of A12,A13,and A14 mount tools.When we are busy, we
Electronics Forum | Thu Jul 19 04:23:38 EDT 2007 | chrispy1963
You dont mention if it is ONLY occuring with the A12 or is it other tools as well? Only spring tools or Stiff ones? Regardless of that, the small X Wagon motor is controlled by the track ball and the bigger X Axis motor is controlled by the joystic
