Electronics Forum | Tue Feb 28 21:24:21 EST 2006 | hashim@actsb.com.my
What is anyone using to clean Siemens ceramic > nozzles. Siemens recommends a 20% ethanoic > solution or a 20% acidic solution but they can't > tell me anyone who manufactures this type of > cleaning solution. I was using alcohol but was > told
Electronics Forum | Tue Jan 15 14:03:18 EST 2008 | patrickbruneel
Hi �Pb-Head� I agree with everything you say, except for your statement that alcohol based fluxes perform poorly with convection heat. The fluxes you tried might have performed poorly, but that doesn�t mean that all alcohol based fluxes perform poor
Electronics Forum | Wed Nov 09 10:08:42 EST 2011 | julien
Hello all, We have an old batch cleaning machine in our production and we use isopropanol alcohol during the rinsing process probably to lower the surface tension. Right now we are looking for a new machine who can do a better job compare to the ol
Electronics Forum | Fri Jul 14 14:26:04 EDT 2017 | davef
How to clean Durostone wave solder pallet? Add date：2016-1-13 Hits：657 Print Back Ultrasonic machines are often used to clean the pallets. This machine is suitable to eliminate the wax, the oil and other stains. With high efficiency, excellent clea
Electronics Forum | Tue Dec 29 20:35:29 EST 2020 | davef
Alcohol Content: Ionographs don't like to have the alcohol content too far off from 75%. If that happens, either way, your resistivity will be low. Temperature: Ionographs don't like to be rushed. Stay focused on a proper warmup time. If you don't,
Electronics Forum | Fri Feb 18 20:53:36 EST 2022 | emeto
From part documentation: CLEANING INSTRUCTIONS A no clean solder system is recommended for IHLP's. If cleaning must be performed, an Isopropyl alcohol is recommended. If de-ionized Water Wash is used insure it is followed by a thorough warm air dry c
Electronics Forum | Tue Sep 15 12:11:36 EDT 1998 | Bill Schreiber
Jeff, The use of flux thinner would only add another chemical to the process. Environmentally, that would not be a good idea. My guess is that you would only end up with "thinner jelly" anyway. Alcohol works well on RMA flux. When assemblers switch f
Electronics Forum | Thu Oct 12 17:56:58 EDT 2000 | DennisF
The white residue can be caused by putting Alcohol on the no clean product. Some people will attempt to clean an area they have reworked.
Electronics Forum | Wed Jun 20 11:43:11 EDT 2001 | genny
M.G. Chemicals "Safety Wash Cleaner Degreaser". A primarily ethanol / methyl alcohol product. Part number "405". Brushes, Kim Wipes, or cotton swabs have all been used from time to time to apply it to the PCB.
Electronics Forum | Mon Dec 03 21:47:11 EST 2001 | davef
In a LARGE degree, the residues being cleaned dictate the selection of an effective saponifier. Your washer supplier may be a good source of suggestions. Many saponifiers present potential VOC issues, because of their use of alcohol. Try: Kyzen Aq
.gif)
