 hitech.gif)
Electronics Forum | Mon Apr 04 10:43:55 EDT 2005 | glaucon
Machines are simply tools to get the job done. Always do a complete assesment of any new machine with a test vehicle and proper research before you buy. Don't believe the marketing hype. Jet-dispense may work AOK for some things, may not for others
Electronics Forum | Tue Apr 04 13:45:11 EDT 2006 | ultraspray
My name is Stephanie Baldwin. I work for USI and have been following this forum. I would suggest that you give both USI and Asymtek the opportunity to coat a sample board for you. You can then compare the two technologies side by side. If possibl
Electronics Forum | Tue Nov 21 14:02:34 EST 2006 | jimmyjames
We have 2 Assembleon Opal X II machines, each with 8 head upgrades placing up to 14k CPH. We have got quote back from Essemtec, Asymtek and Camalot. The thing that is holding us back the most is our realatively small budget of $50k US. Screen prin
Electronics Forum | Mon Nov 06 10:51:23 EST 2006 | SteveH
We have 2 PVA2400 4 axis selective spray machines that we use to spray Humiseal 1B31 and 1A33. They take a bit of programming to get right, though this is easy to do, but do the job OK. Another to consider if you need the 4 axis of movement would b
Electronics Forum | Fri Apr 27 11:23:40 EDT 2007 | pjc
You can get reliable solderpaste dots down to 20-30mil dia. with Type 3. Accurate and repeatable dispensing machine for X-Y-Z placement of the dot is critical. Here are the leading machines: http://www.speedlinetech.com/camalot/index.aspx http://
Electronics Forum | Thu Dec 04 12:24:35 EST 2008 | jdumont
We have the same Asymtek machine, same Humiseal product, same bubbling issue on touch ups. Ive found that very light pressure and a thinner mixture usually yields good results for us. Generally I dip the brush in the mixture and let it drip near wher
Electronics Forum | Tue Jun 09 12:35:18 EDT 2009 | jdumont
We have used an Asymtek C-740 for about three years now and its never had an issue even once. We spray Humiseal acrylic so I cant help you too much with the silicone but the machine itself is great. Opt in for the little process control extras lik
Electronics Forum | Fri Jun 05 14:22:28 EDT 2009 | rdoom
I found this morning that my old Fluidmove software has crashed. I also found out that my installation disk #3 of four is not good. The Fluidmove DOS software revision is 3.3G. Does anyone out there have a copy or image of the diskettes? Any Ideas o
Electronics Forum | Fri Jun 05 14:28:16 EDT 2009 | rdoom
I found this morning that my old Fluidmove software has crashed. I also found out that my installation disk #3 of four is not good. The Fluidmove DOS software revision is 3.3G. Does anyone out there have a copy or image of the diskettes? Any Ideas o
Electronics Forum | Thu May 27 16:29:26 EDT 2010 | jlawson
Milara has released a inline stencil printer with jet printer in same machine - combi functionality. Not as fast in terms of jetting speed as mydata (uses Asymtek jet head) Can print only, jet only or both to say top up paste on certain areas after
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774
.png)
