The new LiquiPrep material preparation and feeding unit https://www.scheugenpflug-dispensing.com/en/news/press-releases/article/the-new-liquiprep-material-preparation-and-feeding-unit-415.html Scheugenpflug has launched a new generation of its prov
Industry News | 2018-02-26 11:10:21.0
Saki Corporation will demonstrate its new 5th generation, 3D Automated Optical Inspection (AOI), 3D Solder Paste Inspection (SPI), and 3D Automated X-ray Inspection (AXI) systems and software at the IPC APEX Expo, February 27-March 1, San Diego, California, Booth 1127. In addition, Saki's 3D AOI system, based on its Quality-Driven Production (QDP) concept for true closed-loop, machine-to-machine communication, will be part of the Fuji SMART Factory Line in booth 3539.
Technical Library | 2019-11-17 22:46:45.0
Overview of walk-in temperature and humidity chamber: It also belongs to environmental test equipment, it tests whether the product can resist high temperature, low temperature, humidity, or the physical and chemical changes produced under extreme conditions, the walk-in temperature and humidity chamber volume is large, the product is placed, or a large object can be placed, such as automobile, new energy, television and liquid crystal screen, etc. How to do the routine maintenance of the walk-in temperature and humidity chamber: 1. The wet gauze basically, if there is no special case, s/b usually changed once in 3 months 2. The water channel shall be regularly cleaned, including water cup, water tank, etc., so as to prevent the water from being blocked,affect the humidity test. 3. It is forbidden to test the flammable and explosive products inside working room. 4. Clean the chamber on a regular basis 2. How to operate walk-in temperature and humidity chamber: The operation method is same as standard temperature humidity test chamber,the controller is 7-inch LCD programmable color screen, you only need to setthe temperature point---test time--how many cycles need to be tested, This can be done automatically, and the machine will stop automatically when it is complete. If there is any problem during the operation, the corresponding problem point will be displayed on the machine control screen. Walk-in temperature and humidity chamber is a must equipment for reliability test of Automobile,Aerospace,Electronic parts,etc,the operation and maintenance are easy,it is teh tear down mahcine,Climatest engineers will be dispatched to do on-site support,for instance,we will finish commissioning,train customers how to operate,maintain,welcome to follow our company facebook page:https://www.facebook.com/Climatechambers
Industry News | 2019-07-01 17:03:23.0
ADLINK Technology has announced an upgrade to its MCM machine condition monitoring solution, with the launch of the DataConnect Pro Remote Facility Information Dashboard, integrating sensor management, data acquisition, edge platform, and vibration analysis, via dashboard-based operability. Users can simultaneously monitor multiple system devices, master real-time machine operation information, and create effective dynamic preventive maintenance strategies for reduced downtime, and increased production capacity.
Industry News | 2010-03-30 16:26:27.0
AUBURN, Maine — March 23, 2010 — Consistently printing clear and crisp labels requires the proper cleaning maintenance of any thermal printer. KICTeam's introduction of the Seiko Instruments Smart Label Printer Cleaning Card which features Waffletechnology will maintain that clarity on Seiko Instruments thermal printers. This new product was designed specifically for the SLP family of thermal printers through a joint effort of Seiko Instruments USA, Inc. and KICTeam. This new cleaning card is a quick and almost effortless means of removing any leftover adhesive residue or paper dust that can deteriorate the legibility of the print.
Industry News | 2021-12-15 20:08:31.0
Siemens pressure transmitter is a kind of equipment which converts pressure into pneumatic signal or electric signal for control and remote transmission. It can convert the physical pressure parameters such as gas and liquid sensed by the load cell sensor into standard electrical signals (such as 4 ~ 20mADC), which can be supplied to the secondary instruments such as indicating alarm instrument, recorder and regulator for measurement, indication and process adjustment.
Industry News | 2021-03-12 04:57:42.0
CyberOptics® Corporation (NASDAQ: CYBE) will feature the WX3000™ metrology and inspection system with Multi-Reflection Suppression™ (MRS™) sensor technologyat SEMICON China,scheduled to take place March 17-19, 2021 at the Shanghai New International Expo Centre, hall N1, booth 1387 and 1325. The company also will demonstrate high-precision WaferSense® sensors for semiconductor tool setup and diagnostics.
Industry News | 2021-12-03 20:03:25.0
Differential pressure transmitter is a kind of pressure measuring instrument widely used in all kinds of chemical industry. Working principle of differential pressure transmitter is as follows. The differential pressure from the two-sided pressure pipes acts directly on the two-sided isolation diaphragm of the differential pressure transmitter sensor, and is transmitted to the measuring element through the sealing fluid in the diaphragm. The measuring element converts the measured differential pressure signal into the corresponding electrical signal and transmits it to the converter. After amplification and other processing, it becomes the standard electrical signal and then is output.
Industry News | 2021-12-03 20:10:42.0
The Variable Frequency Drive (VFD) is a device widely used to convert the constant voltage of an autonomous AC power source into a variable voltage for controlling the torque and speed of the motor. They are ideal for motors that drive loads on mechanical equipment. A VFD offers higher efficiency than simple inline motors, as well as a degree of control not available with simple drive motors. These factors can save energy costs, improve production performance and extend motor life.
Industry News | 2012-03-07 23:38:51.0
Automated optical and x-ray inspection technologies have become highly effective, which is fortunate as electronic assemblies have become too complex and densely-packed for manual inspection alone. Nordson YESTECH, as an established leader in the field has seen a continuously growing customer base and a corresponding growth in demand for training and support. Accordingly, YesTech Europe now has a UK Training and Demo facility which ensures customers can understand the technologies’ true potential, and succeed in applying it.
