Electronics Forum | Thu Nov 30 14:32:07 EST 2000 | Claude_Couture
Production of 50000, is this per year, per month, per week, what? As for your budget of 80000 Euro, that is no much to go on. For a basic SMT line, you need at least 1 paste printer, 1 placement machine and 1 reflow oven. If you have any through-hole
Electronics Forum | Thu Nov 14 12:55:03 EST 2019 | SMTA-Tony
Very late but here's my 2 cents. Will require a custom fixture for every flex or semi-rigid flex. Depending on panel thickness; use 2 tooling hole to fixture on one axis, other tooling holes will have pullers to ensure proper placement. Even with the
Electronics Forum | Tue Dec 04 14:31:50 EST 2007 | davef
Search the fine SMTnet Archives for previous discussion. This technique has been called 'pin-in-paste,' 'paste-in-hole,' 'intrusive reflow,' 'alternative assembly and reflow technology' and who can remember all the other consultant buzz-words. Look a
Electronics Forum | Fri Oct 03 15:51:45 EDT 2008 | davef
We agree with Huss. Your clearance 8 to 11 thou between lead and hole make ion difficult. And that assumes the 0.027 to 0.030" hole size is the finished, not drilled size. It just gets worse if this hole size doesn't consider plating.
Electronics Forum | Thu Sep 09 09:13:10 EDT 1999 | Scott Cook
| hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the precis
Electronics Forum | Mon Oct 06 14:10:55 EDT 2008 | chineechooze
0.001969" You say that 0.008" of "slop" is un-doable; hence, the reasons for our failures. Any basis for that statement? Are rated accuracies from placement equipment manufacturers typically "exgaggerated?" 2. On PCB Fab side of things, what is
Electronics Forum | Mon Apr 10 09:48:43 EDT 2000 | Dave C.
John, having worked at a major U.S. telecommunications co. I can tell you we were placing through hole connectors in SMT. Using MPM printers 3000 2000 AP36 AP24. We opened the apertures on the stencil 25% over lead diameter to allow more paste(it wou
Electronics Forum | Fri Oct 03 11:01:43 EDT 2008 | hussman
Change your board to bigger holes.
Electronics Forum | Sat Aug 10 06:38:25 EDT 2002 | jojojameson
Dear Freinds, We are having 18000 sqfeet airconditioned space for pcb contract manufacturing.We had chipschooters,through hole machines & fine pitch placement machines with international standard.In addtion we had clean rooms & wire bond facilities.W
Electronics Forum | Fri Sep 10 09:03:52 EDT 1999 | ScottM
| | hi, i m college student. i m currently doing my Final year project in PCB drilling. the main task is to design auto feeder which allign the PCB properly in position before drilling take place. the close tolerance becomes a big problem to the prec