Electronics Forum | Tue Sep 28 01:50:23 EDT 2004 | grayman
You mean if I bought that material in USA or Europe It will be expensive. If you buy those material in places where labor is cheap then you get cheap prices with same capability. You are really missing something....
Electronics Forum | Fri Jul 15 16:53:56 EDT 2005 | davef
Questions are: * Are you sure there was solder on the pad prior to placing the component? * Is there solder on the lead, but not on the pad?
Electronics Forum | Thu Aug 10 15:14:53 EDT 2006 | slthomas
Do we know how this part was damaged? Hopefully the issue will be resolved before placing the new part.
Electronics Forum | Tue Sep 26 11:05:44 EDT 2006 | slthomas
You might also have a dirty/sticky Z-rod resulting in the same problem, although ordinarily you'll see a lot of missed pickups as well.
Electronics Forum | Tue Sep 26 15:09:17 EDT 2006 | slthomas
I hope that you don't miss that data later on. My suggestion of changing align type to "2" (in the extent data) eliminates the alignment step but leaves the data intact.
Electronics Forum | Tue Nov 27 07:51:21 EST 2007 | shy
is there any gap between the pad and terminal if we place the glue? Btw, my practice to print solder pate then punch glue then PNP component and finally reflow. Also we find drop/missing chip after wave eventhough we glue the component.
Electronics Forum | Wed Aug 13 06:40:35 EDT 2014 | rusigan
We are having a problem setting up the Mirae MR20LP Pick and Place Machine.For some reason the program cannot see the feeders.All the feeders in the program are in Yellow which means FEEDER MISSED but supposed to be green.
Electronics Forum | Tue Oct 05 18:37:19 EDT 1999 | Morris
| I hope that someone can help me with my problem! I am experiencing a lot of glued on parts falling off in the wave solder machine. A little information about my process: 1)We use Loctite 3609 glue that is used up long before its shelf life 2)Our
Electronics Forum | Wed Oct 06 08:55:23 EDT 1999 | Brian Conner
| | I hope that someone can help me with my problem! I am experiencing a lot of glued on parts falling off in the wave solder machine. A little information about my process: 1)We use Loctite 3609 glue that is used up long before its shelf life 2)Ou
Electronics Forum | Fri Oct 03 10:24:17 EDT 2008 | chineechooze
I have a problem with placement repeatability and accuracy on this Samtec connector. The customer wants to use a "nubbed connector" which has to be placed in the corresponding PCB holes. When the nubs miss the holes, the part becomes "lifted." SEE
