Electronics Forum | Thu Dec 31 19:25:11 EST 2015 | ttheis
Resolved. Thanks to some information provided by the fine folks over at Capital Equipment Exchange I was able to update the system to a EXP-VID-B video card, replacing the EXM-13A and EXM-14 combination. This update eliminates the jumper cable betwe
Electronics Forum | Mon Jul 11 07:40:11 EDT 2016 | spoiltforchoice
I don't know your machine but you are looking at the most likely areas. Some machines define a placement pressure, other may define an overtravel to make sure the device is firmly placed on the board. There are usually also timings for when the vacuu
Electronics Forum | Sun Nov 27 16:53:39 EST 2016 | ttheis
Our UP500 has been running great for a few months then the AC/DC 5/12/24V power supply stopped working and the PC could not communicate with the cage. The PC screen also got very noisy. We replaced the power supply with a used replacement and the ma
Electronics Forum | Tue Sep 15 01:16:32 EDT 2020 | kylehunter
We have the same issue. It was present with our old 1500 and is even more present with our newer 1800EXL. For us, it seems to be related to the blowers, not the heaters. If we are in cooldown or wakeup the issue is still there with the heaters off.
Electronics Forum | Wed Aug 04 16:43:58 EDT 1999 | John Thorup
| We are installing a new reflow oven and I have been told that we do not need to vent the exhaust out through the roof since we have a false ceiling. All that is required is to vent above the false ceiling and that the air exchange is great enough t
Electronics Forum | Fri Apr 16 01:19:10 EDT 1999 | Wiratsr
Hi Jeff, I didn't have experience with Pansert MV2-E, but I have MV2-F. The machine running in high speed, but very noisy. I have other machine Sanyo TCM-3000 Same speed with MV2-F. Sanyo is original design turret system, a stable mounting machine,
Electronics Forum | Mon Dec 16 07:38:07 EST 2002 | Claude_Couture
It is surprising how a simple question sometimes reveals complex issues. It seems from reading many replies that an employee wearing a walkman while working is making a statement about his attitude toward his work and his employer. This is similar to
Electronics Forum | Fri Mar 04 04:44:16 EST 2005 | ianlg
Hi I do not expect that anyone will provide you with schematic s for the board itself as providing detailed info on the boards was regarded as a no no when I was working for SMTech/Speedline SMTech. We do not ourselves have detailed schematics but
Electronics Forum | Wed Jan 18 21:30:38 EST 2006 | daxman
Hello everyone! I'm new to this forum. I just got back into an SMT career after a 4 year break, and it feels good to be back. Anyways, I'm doing some maintenance work with a Fuji CP-645. It has a few problems that I am currently unable to isolate, a
Electronics Forum | Wed May 25 10:01:59 EDT 2016 | stevedc
I tend to get issue on and off with the feeders either stalling and/or running slow/noisy. They are actually pretty easy to clean and maintain. If you take off the side panel of the feeder you will see a few gears, belts and a motor. The first thin