Electronics Forum | Fri Jun 18 10:59:37 EDT 1999 | Scott Cook
| A user of one of our components exceeded the floor life of some plastic BGA components. They did do a pre-bake prior to SMT reflow but only 72 hrs at 40C and not the recommended 12 hours at 125C. I've recommended accoustic microscopy to look for po
Electronics Forum | Thu Jan 19 15:21:54 EST 2006 | GS
my experience: End '80 beg '90 we use a solution like that. Along the assembly lines, next to P&P machines we use to get dry cabinets (cheap and simple cabinet) where to put inside of SMDs (reel & trays once out of MBB ) during the waiting time from
Electronics Forum | Wed Sep 06 06:04:16 EDT 2000 | Dreamsniper
Hi Guys, I'd like to collect info regarding YAMAHA YV88 Mark2 and YV100 series. Are they of any good compare to Universal GSM1 or Panasert MPAV2 ? My new company's products have hips of fine pitch components (0.5mm) and we are planning to get new eq
Electronics Forum | Mon Sep 20 07:30:28 EDT 1999 | George Henning
Can anyone help with programming a D^2 Pak on a Panasert MV100. I'm having trouble setting up the parts data and teach the component. What should the Up, Down, Left, Right, Component Code, Lead Details, and Cut Lead Settings be? A link to the package
Electronics Forum | Sun Feb 15 17:12:15 EST 2004 | brian bennett
as george says move beam back towards the centre of the machine make sure it is square although not neccesarily on the alignment arrows. make sure alignment laser is clean along with the recieving mirror on the head.also make sure the driver filters
Electronics Forum | Wed Sep 20 17:24:35 EDT 2006 | Stano
I have problem with Panasert MV2VB. After activation machine start up Windows NT normally, well near end initialization displayed message: MMI initial check - Symbol 1 - 0 error. After initialization finish and Power On machine is dispalyed Self diag
Electronics Forum | Wed Apr 10 11:55:58 EDT 2002 | Yngwie
Temp/Humidity requirement for baking normally specified at : Low Temp baking : 40 deg C at 5% RH High temp Baking: 125 Deg C at 5% RH. The problem here is the 5% ? Although the 5% is achievable with a special Oven, can someone explain why is it 5%
Electronics Forum | Tue Mar 21 17:32:48 EST 2000 | Charles Barker
Greetings all you knowledgable SMT persons! 1. Typically, for multi-layer (6-8 layers), FR4, SMT boards stored in an air conditioned environment at about 50+/- 10% RH, how many months (or years) would you allow to pass before you would recommend bak
Electronics Forum | Tue Jul 06 10:46:12 EDT 2004 | blnorman
We have now switched to Kester EP256. During our solder paste evaluation, resistance to humidity was one of the selection criteria. We printed multiple boards, then exposed them to 85�F/65% RH. At 30 minutes, 1 hour, 2 hours, and 4 hours exposure
Electronics Forum | Wed Sep 01 05:29:40 EDT 2010 | arjan
We baked the parts just before assembly. 2>we baked the parts and store them in 4 days in drycab (60degC, Rh0,5%)and finally assembly 3> we baked the parts and refowed them on a leadfree profile and finally the assembly on the boards. The same we als
