Electronics Forum | Thu Feb 15 07:25:05 EST 2001 | Nick
0.5um(Ni~6.5um) after reflow(data taken in 48hrs).But after performing temperature cycle test ,the former aging rate(from the shear strength ) seems faster than the latter.Why!?Someone call this the 'precipitation hardness',but what actually is it! A
Electronics Forum | Fri Jan 15 09:27:18 EST 1999 | Earl Moon
| I saw the problem of void in solder bump or in lead less component or some BGA. But I didn't have standard specification of that void is accept or reject? Do any body have the better idea or suggestion of the criteria ? | | Thank you, | Wirat
Electronics Forum | Wed Oct 27 16:55:38 EDT 1999 | Joe Herz
Jerry, In our house we generally run a glue bottom last but people do it both ways. Our logic revolves around protecting components from being knocked off the board during handling and processing prior to wave solder (this is most important with sm
Electronics Forum | Wed Oct 06 03:18:01 EDT 2004 | Joseph
Dear all, Recently our customer complaint that some components being came off from the pcba after dropping test.But the curious is, the leads show visible solder fillet covering more than 75% of termination area on pad, which is acceptable as per IP
Electronics Forum | Mon Dec 11 20:44:37 EST 2006 | davef
Title : LEAD-FREE WAVE SOLDER FLUX EVALUATION Author : Michael Havener Author Company : Benchmark Electronics, Inc Date : 09/25/2005 Conference : SMTA International Abstract : The European Union�s deadline to ban lead in electronic pr
Electronics Forum | Fri Feb 21 11:33:47 EST 2003 | Jaime
Call your glue manufacturer. It sounds to me that the epoxy is not curing properly. You should also test for shear strenght. How many pounds of pressure does it take to "pop" a cured component after it comes out of the oven? What type of oven do you
Electronics Forum | Wed Mar 30 16:46:03 EST 2005 | chunks
There is no spec because solder is designed to provide an electrical connection not a mechanical connection to hold the part on. If it where mechanical we�d be welding our parts on. Your pad width and length are derived from your component manufact
Electronics Forum | Tue Mar 22 07:39:05 EST 2005 | davef
There is no standard. This is a relative test. If you wish to do tests of this kind, we suggest to pay attention to the following points: * Shear strength of soft solder depends on the deformation speed applied. The faster the material is deformed t
Electronics Forum | Fri Oct 01 05:03:28 EDT 1999 | Wolfgang Busko
| | | I am having problems processing immersion gold boards. The achieved solder joints appear acceptable a la IPC-A-610, but the resultant joint does not fully cover the land, i.e. you can still see an outline of gold pad. | | | What is the best way
Electronics Forum | Thu Dec 09 17:45:27 EST 2004 | davef
You're correct. There is no criteria for no-lead, but there none for SnPb, either. Solder joint strength in pull/shear will vary with lead geometry, solder volume, lead metal/metallization, the way the test is done.