Electronics Forum | Thu Nov 14 10:03:40 EST 2002 | davef
Doug, Ooooooooo. You're correct Vinny has to be talking about Rogers teflon boards. Vinny, There are many different types of PTFE based products. Generally speaking, PTFE has a melting point of 620degF and withstands solder reflow and HASL proce
Electronics Forum | Wed Apr 30 21:00:36 EDT 2003 | davef
ENIG is a common solderability protection on BGA packages. Pd/Ni/Au while more expensive could have advantages over ENIG in the following area: * Allow both gold and aluminium wire bonding * Better solder resist compatibility (63�C max) * Might take
Electronics Forum | Wed Aug 14 03:14:39 EDT 2002 | lloyd
Thanks for the replys'. So are you saying that SMD adhesive contains a flux agent?, because at this point in the process the boards have no solder on them at all, it's all done at a solder bath after the chips have been bonded.
Electronics Forum | Tue Oct 05 02:31:06 EDT 1999 | Eric
| | Hi everyone, I need some help on the whole process of double sided surface mount. We have been doing surface mount for about 3 months and we're getting ready to take on our first doule sided board. I just need some step by step process regarding
Electronics Forum | Mon Oct 04 21:37:31 EDT 1999 | park kyung sam
| Hi everyone, I need some help on the whole process of double sided surface mount. We have been doing surface mount for about 3 months and we're getting ready to take on our first doule sided board. I just need some step by step process regarding so
Electronics Forum | Sun Apr 05 00:23:53 EDT 2020 | researchmfg
1. To protect the nickel and copper under gold plating from oxidization before soldering. Gold plating can extend the PCB self-life and improve the solderability for 2nd re-flow. 2. Provide a good bonding strength. For Chip on Board process that Gol
Electronics Forum | Wed Jan 09 12:20:00 EST 2002 | mregalia
Thanks for cluing me into IPC-2221. Though the numbers they give seem to contradict what I have learned from people working with the materials. At least I now know where the guideline for a max of 30 microinches of gold for soldering comes from. But
Electronics Forum | Mon Jun 18 16:48:00 EDT 2001 | Gil Zweig
We have found a significant number of PBGA problems associated with physical deformation of the package. Deformations such as dishing (potatoe chipping) and delamination under the die (popcorning). These can be detected by x-ray by the variation patt
Electronics Forum | Tue Feb 08 16:09:09 EST 2000 | dean
Generally speaking with most electronic grade epoxies: 1. Cure time is a function of temperature. 2. Polymer bonds begin to quickly break down above certain temperatures (product specific). I believe aprox 170-180C. The strength of the bond de
Electronics Forum | Wed Dec 28 16:03:53 EST 2005 | Chris
I have lots of experience with thermosonic gold ball bonding. You can read the literature and you will probably find some papers that say you can do it. I have never been able to do it. We gold ball bond all day long with little problems at all bu
.png)
winsouce.jpg)
