Electronics Forum | Thu Nov 05 00:11:11 EST 2009 | shinseimy
Hi, You might be can consider try our brand AOI checker. We are the manufacturer the AOI which located at Malaysia. The programming is very easy to use, and effective on the speed. Furthermore, 2D barcode reader, NG marking included. If you are inte
Electronics Forum | Mon Nov 02 04:02:26 EST 2009 | dannou
Pitbull, Yes. OS2 is the OS too, get it. Wouldn't you figure....right after we buy the VT9500, Orbotech comes out with a Windows XP Professional platform. A more "user friendly" operating system. I'm sure that most systems out there are superior i
Electronics Forum | Sat Nov 07 10:09:52 EST 2009 | ramses2001
Hi Nemo, In my factory we have an offline AOI from VISCOM for two SMT lines. It's not so easy to program, but the results are very good. Anyway you should have to think that an AOI system needs a human inspector and a technician to debug the program
Electronics Forum | Wed Feb 25 21:47:24 EST 2015 | dinhhuunam
Hi Marshall Bartel, SJ INNOTECH Printer is Best solution & Service for you ! HP-520S/HP-620S/HP-760S/HP-1000S Printing (±0.0125mm) Repeatability (±0.01mm) 0.3 Pitch QFP, 0402 Chip, Ø0.2 MBGA Speed/pressure control by printing section (5 sections) V
Electronics Forum | Wed Aug 28 10:16:12 EDT 2002 | Jim M.
Sam We install a lot of die in the SMT room using same process as SMT parts.Water soluble solder paste is used for attachment of die to ceramic and boards. Biggest problem i found is the adjustment from installing the die in the bonding area. The t
Electronics Forum | Wed Feb 11 00:34:42 EST 2015 | comatose
There isn't going to be much worthwhile used equipment out there if you mean true jetting - it is a pretty recent process. There are lots of used stencil printers out there, so from an up-front cost perspective, stencil wins. Jetting is slow. A hig
Electronics Forum | Thu Dec 10 09:06:47 EST 2009 | stepheniii
Just how cold do you store your paste? And what are your solder paste reps like? Here they fall over each other giving support for their paste. And have you seen the problem with flux separation or have you only heard about it?
Electronics Forum | Tue Dec 08 08:52:42 EST 2009 | cunningham
How do people prepare there solder paste for screen print? We currently remove them from the fridge and mix them in a 500g solder paste tub mixer to mix the flux and paste together we waste to much paste at the moment as we only use the tub for 1
Electronics Forum | Mon Dec 14 18:45:08 EST 2009 | gregoryyork
why not use a paste where it requires no refrigeration at all cheers Greg
Electronics Forum | Tue Dec 15 00:09:26 EST 2009 | isd_jwendell
Which paste are you referring to?
Capital Equipment Solutions - SMT | PCBA | TEST
Equipment Dealer / Broker / Auctions
113 S Main Street
Lodi, WI USA
Phone: 6083431779