Electronics Forum | Thu Apr 10 18:00:14 EDT 2008 | tonysmt
Thanks llew explanation & information was a great help.
Electronics Forum | Tue Apr 01 12:52:34 EDT 2008 | pstone
Thanks for the insight. Most boards we are seeing problems with are 1.60mm thick (some less) and most of them are panelized. For your support pins what do you use to show operators where the pins should be setup? I have heard of using Plexiglas to m
Electronics Forum | Mon Aug 08 17:14:42 EDT 2005 | Cmiller
Is there anybody out there who has a current support contract with Agilent that can download the patch to bring version 3.81a to 3.81b off thier website? They never sent it to us, they did end us version 5 a few years ago but dont want to upgrade to
Electronics Forum | Tue Apr 01 14:09:09 EDT 2008 | cyber_wolf
I have always heard the glory of plexi glass templates but have never seen them successfully implemented. ECR changes make this system nearly impossible when you are trying to manage thousands of assemblies. We have removed the hand cranks from the
Electronics Forum | Tue Apr 01 17:14:11 EDT 2008 | aj
Hi, We only have 2 lines , but I dont allow any of the Ops to set them up, I did once and winded up with 10 damaged nozzles and cracked caps on the boards ... If the problem is as big as you say it is , you should really spend some time setting it
Electronics Forum | Tue Apr 01 17:16:05 EDT 2008 | aj
actually , just had a thought. Do you have any products that you dont see this problem on ?
Electronics Forum | Wed Apr 09 13:30:16 EDT 2008 | fujillews
Hi, Please email me directly at llew@alternativesmt.com i will explain how and provide the information you require. Regards Llew
Electronics Forum | Tue Jan 18 13:09:59 EST 2011 | cyber_wolf
Has anyone had issues getting technical reflow support ?
Electronics Forum | Tue Jan 18 16:21:47 EST 2011 | jmw
Ya...good luck with that.......vitronics phone support is as bad as juki's.....HIT OR MISS....with both.
Electronics Forum | Tue Sep 05 06:23:19 EDT 2006 | jonatf
Hi guys, I want to improve the set up of our printing machine(EKRA) especially on a 0.5mm thickness double sided boards.I find the support pins very time consuming.. any advice?? thanks.