Electronics Forum | Wed Oct 26 10:21:28 EDT 2005 | russ
We are also experiencing problems with this thick stiff paper tape. Our problem is the strength of the spring that supports the tape at its pick position. After a while it just pushes it down because the tape exit wants to bend the tape too sharply
Electronics Forum | Fri Sep 27 08:36:27 EDT 2002 | alewis
We are a manufacturer of placement machines and I believe that you asked if there was a reference that can be used to determine the tape sizes for most SMD packages. We review the catalogs from Practical Components and Top Line to determine tape size
Electronics Forum | Wed Apr 02 12:44:15 EDT 2008 | cyber_wolf
Does anyone know of an after market source for the E-clips that hold the tape covers on CP and IP feeders. I am sure I can dig something up I just figured I'd ask ya'all first. Fuji PN: S1021A
Electronics Forum | Thu Dec 15 08:09:06 EST 2005 | GS
Hi Liza, several years ago we had problem like that only with Carrier Tape made by Ploycarbonate material and by using High Speed pick & place. Very few pbms met by using low speed P&P machine. Problems have been solved by using Polystirene Carri
Electronics Forum | Fri Sep 27 10:01:25 EDT 2002 | stefwitt
chips up to 1411 ( I have not seen a 1411 component yet, but 1210 is a good number ) in 8 mm, IC up to SO8 in 12 mm, IC up to SOL 20 fit in 16mm tape. This is just a basic rule. You may also find SO 20 in 24 mm tape. More important is the reel width,
Electronics Forum | Wed Apr 01 03:44:59 EST 1998 | Kim Krauch
Does anyone know where on the net I can find a list of FUJI feeders? I'm looking for a feeder that can take 88mm tape? Any information would be apreciated. Thanks Kim Krauch
Electronics Forum | Thu Oct 27 08:46:58 EDT 2005 | james
Yes I would have to agree Kemet is the worse. I believe our feeders are just not strong enough to handle the thickness of the tape. It seems to need alot of force to move and to roll the tape through.
Electronics Forum | Tue Jan 09 06:45:08 EST 2018 | micomac
We have Europlacer flexys pick and place. We have had 3 turret collisions with 8mm feeders arising from the tape retaining clip coming free during operation. Have asked Europlacer for part numbers for safety catches that a technician told me existe
Electronics Forum | Thu Oct 27 09:07:50 EDT 2005 | russ
Is anyone aware of the spec for tape if any?
Electronics Forum | Thu Oct 27 12:58:33 EDT 2005 | gregp
EIA-481-B Max tape thickness 1.1mm (not including bottom and top cover tapes which can be .1mm max each) Of course a 1.1mm thick piece of steel will be stiffer than a 1.1mm thick lasagna noodle (already cooked). Is the thickness the issue or is it t
winsouce.jpg)
.gif)
