Electronics Forum | Mon Oct 26 01:37:43 EST 1998 | Samson
I'm very new to the SMT process but I'm tasked to qualify a MPM Printer and a Panasert PnP m/c. The product consists of 6-10 different parts of a total of around 70. Please advice on the parameters for each m/c which I should focus on for optmization
Electronics Forum | Wed Oct 07 03:34:11 EDT 1998 | Thomas Blesinger
I am trying to find out, what possibilities I have, to print solder paste on a board, when the task is to have 120 Microns thickness for the biggest part of the board (85% of the real estate), and then have 250 Microns of thickness on the remaining
Electronics Forum | Mon Sep 10 16:07:37 EDT 2001 | johnw
Hi guys HELP!!!!!!!!!! I have been tasked with working out a chart to show calibration acCuracy and that my machines are in control I say to myself I know they are cause I have no misplacement of fine pitch but this is not good enough for my co
Electronics Forum | Thu Sep 20 14:33:18 EDT 2001 | jschake
I'm not sure how soon you are planning to perform this experiment, but it certainly would be interesting to get a snapshot of any results you could feed back to give us all a sense of closure regarding this issue. Is this possible? My sympathy is w
Electronics Forum | Wed Nov 07 10:59:55 EST 2001 | paulburt
Hello all, I have been tasked with bringing my company up to spec with J-STD-033, yes lucky me! My question is this: While I was searching the Web for suitable suppliers of dry cabinets I came across a company advertising a humidity control system f
Electronics Forum | Wed Nov 07 13:57:41 EST 2001 | Cory
I have been tasked with trying to find out how to do a basic to difficult quote for a job to be manufactured either in a oem or cem. Can or does anyone have any info that could help me get this adventure off the ground?? Is there an easy template or
Electronics Forum | Wed Feb 05 08:20:14 EST 2003 | mbroadway
I'm new to the smt game. I'm trying to learn the basics of stencil design. I've just been tasked with removing and replacing a couple of mictor connectors. I need to find/design stencils for the solder paste. These boards are proprietary, and we don'
Electronics Forum | Thu Jul 18 09:31:11 EDT 2002 | Mark S.
As part of our Efficiency Improvement Plan I have been tasked at determining the Key Production Indicators from available production data. So I thought I would ask others what they thought were 1) the top production indicators for their facilites 2)
Electronics Forum | Thu Jul 25 10:52:26 EDT 2002 | waynesmith
I've been tasked with increasing the CCA throughput in our Conformal Coating workcenter. My first approach will be to look into a more *automated* approach for the masking process. We currently use a manual method of using masking tape prior to con
Electronics Forum | Fri Oct 11 05:49:16 EDT 2002 | jason
Hi, Recently I am given a task to perform a drop test on a cardboard tote box. Inside is 180 pcs of assembled PCBA with cardboard dividers. But it was unable to withstand the drop test and thus the some of the boards are damaged. Does anyone ha
