Electronics Forum | Thu Sep 17 15:21:50 EDT 2020 | lpbro
For height, I start +-2mil usually. For 3mil stencils, my lower limit starts at 1.5mil, upper is 5. If the area is chem ethed, I normally add .5 to the stencil height. My default volume is 60 - 160%. Then print specs are adjusted till I see fit, then
Electronics Forum | Fri Sep 18 15:47:15 EDT 2020 | majdi4
Hello guys , For our SPV machine (Printing machine) , am looking for flexible support pin or some other idea to support PCB during second printing process ( Double side process) . We actually using ( 1: stainless steel support with voids for mount
Electronics Forum | Tue Sep 22 22:15:05 EDT 2020 | stephendo
I seem to remember using a system similar to this one. http://production-solutions.com/redesetmanuallock.php The one I saw had the supports spring loaded and free when you first brought the support up to the board. Then you used an Allen key at the
Electronics Forum | Tue Sep 22 13:51:23 EDT 2020 | makersan
Hi If anyone uses a label feeder in yamaha ys12f model p & p machine, Can it tell you how to connect the machine with the label feeder? The label feeder we will use is in the link below. https://label-feeder.com/wp-content/uploads/2015/07/Product-
Electronics Forum | Thu Sep 24 12:59:59 EDT 2020 | davef
If whatever is preventing the leads on your component from wetting is oxidation, cleaning the component will not help. Consider trying a more active flux prior to soldering. Understand from your supplier the potential complications that may affect
Electronics Forum | Wed Sep 23 13:44:57 EDT 2020 | emeto
Hello SMT bear, 1. Is the embossed tape the correct tape for the component? Sometimes packaging services might use wrong tape if part was sent for tape and reel. CAn you tell us what package the component is? What tape is it packaged in? 2. Feeders
Electronics Forum | Wed Sep 30 21:48:13 EDT 2020 | kylehunter
> If you could change the design, a 2x25 1.27mm > pitch surface mount connector is a standard part > from Wurth. Samtec also do versions in any pin > count you might desire, with locating pins, > without, with picking clip etc.
Electronics Forum | Thu Dec 17 15:53:32 EST 2020 | dwl
for option 3, if you place the connectors on the first pass then flip the board, won't the protruding leads interfere with second pass stencil printing? My vote would be to overprint onto the solder mask. you can print pretty far and still have it w
Electronics Forum | Wed Sep 30 20:35:51 EDT 2020 | erici
Hi all, was wondering if you have any ideas on how to correct the problem we are encountering with our S25 machine. The machine is giving an X-axis counting error at gantry 1. I replaced the x-axis linear reader and the linear scale as well, but st
Electronics Forum | Fri Oct 02 13:55:58 EDT 2020 | lesfarnacer
hi , need help please with my DEK Horizon 03i , we trying to programme a longboard 600mm on the printer and board lengh on our printer is limited to 510mm . I checked on the hardware eve thing is ok but in the software we don't have the longboard op
