Electronics Forum | Mon Oct 07 16:07:22 EDT 2019 | ddfreeze
I have a silver aluminum z axis sensor that is not mounted, I need to know where it goes. The sensor has a picany rail type mount, triangular rail insert type. It is located in the board support nest area. Seems like it might go on the inside of the
Electronics Forum | Wed Oct 09 13:18:46 EDT 2019 | dwl
What is the advantage of dispensing dots over dispensing a line? I don't see any reason why dots wouldn't work. You might have to experiment a bit to dial in the right volume and spacing to get the desired end result, but it shouldn't be hard. Fisna
Electronics Forum | Wed Oct 16 10:51:35 EDT 2019 | radialvalve
Hi Joe, sorry for the delay in responding to your request, hope it's not too late. There are several questions to be answered before we can guide you to the best solution to meet your Thermal Gel Dispensing Needs. I would like the opportunity to disc
Electronics Forum | Wed Oct 09 17:05:36 EDT 2019 | slthomas
I think you answered your own question by providing new information. If your AOI isn't capable of catching the vast majority of SMT soldering issues and you're SMT process isn't functioning at a very high level, you probably should count on inspect
Electronics Forum | Mon Oct 14 07:44:59 EDT 2019 | spoiltforchoice
It does seem to be very much hardcoded proprietary algorithms with all the parameters and maths done on the local machine. No knowledge sharing between machines or back to the vendor ("crowd sourcing" as it were) no cloud magic etc. VI appears to be
Electronics Forum | Thu Oct 10 03:18:28 EDT 2019 | bukas
Hey guys, my DEK265 GSX is acting funny. It misprints half of the boards. The one half when squeegees move away from operator to be precise. When squeegees are moving towards operator print is perfect. In both cases actuators are moving prior to prin
Electronics Forum | Fri Oct 11 03:06:00 EDT 2019 | bukas
Hello Dekhead, it is a constant offset, like 0.5 mm to right when machine prints away from operator. When print goes towards the operator there is no offset. I swapped X5 and X6 cards with spares I got but still same result . I set the program to hav
Electronics Forum | Thu Oct 10 09:31:36 EDT 2019 | chrislandafont
Hi Everyone, We've just bought a second hand Omron VT-RNS-pt AOI machine. It appears to work fine but we're struggling to understand how to program it. I have the set of manuals but they are not easy going, and it's going to take me quite a while
Electronics Forum | Tue Oct 15 17:54:08 EDT 2019 | davef
From J-STD-001: Components designed for pin-in-hole application and modified for butt connection attachment, or stiff-leaded dual-inline packages (e.g., alloy 42, brazed or tempered leads) may be modified for use on Class 1 and 2 products but shall n
Electronics Forum | Tue Oct 15 11:16:30 EDT 2019 | charliedci
We have been using Cree 3 color LED's (CLV6A-FKB) in many products for several years (pic attached). At the rate of 3 to 5% of the units assembled with this LED, the Red LED fails. After touch up with soldering iron it functions. This happens to the
winsouce.jpg)
