Electronics Forum | Tue Sep 05 10:43:02 EDT 2023 | klauss
I've some special nozzles for melf packaged diodes. When I am trying to mount it on pcb, nozzle picks up the diode and place it well. After 5-6 times of placing, diodes keep drops down to it's package from nozzle. It's like the vacuum doesn't enough
Electronics Forum | Wed Oct 11 13:40:20 EDT 2023 | proceng1
Agreed. Your "leads" are fairly small compared to the PAD area, so you leave your part lots of room to "stretch it's legs". One thing that I have trouble communicating to my operators is that placement does not have to be perfect, and neither does t
Electronics Forum | Thu Oct 12 21:45:21 EDT 2023 | daniel_stanphill
This is a very challenging situation indeed. Have you tried contacting the manufacturer of the component? I know of one time in the past we had a reflow issue and contacting the manufacturer actually proved insightful. I have seen claims using Diamon
Electronics Forum | Fri Oct 13 10:44:03 EDT 2023 | yannick_herzog
Hello, thank you for your responses. Some time has passed since then. Unfortunately, we have been facing the issue of incomplete filling in the production when it comes to large openings in the template. This phenomenon occurs in both directions. T
Electronics Forum | Mon Oct 16 16:30:27 EDT 2023 | yannick_herzog
@MagyarT the error occurred across multiple PCBs throughout the entire job. So, for example, the issue isn't limited to just the first printed one but spans the entire duration. At what dimensions would you recommend a division? The apertures on the
Electronics Forum | Tue Oct 17 09:26:55 EDT 2023 | georgegr777
Thank you , I checked the green button. When I pushed it I can heare the relay noise and the LED between green and red button is on. But when I push the READY switch it is not responding. As for the email the gmail server send me back information th
Electronics Forum | Tue Oct 17 14:34:13 EDT 2023 | unsung
My personal email is a better way to reach out to me I can foward you some information On this. Also it's around 5 power supplies. I haven't played with your version on cp 40. I only work on cp 20, 30 , 45 , 45neo sm341 and Cp60 I'm also on LinkedIn
Electronics Forum | Sun Oct 22 13:52:40 EDT 2023 | protokos
> This will be a problem as the calibration <BR> > settings are stored per machine in the <BR> > Application Support folder. You will also need to <BR> > know what the last firmware you were running as &l
Electronics Forum | Wed Oct 25 19:50:04 EDT 2023 | wijim
Maintain a comprehensive component library or database that includes information on all the parts used in your assemblies. This should include not only the manufacturer part number but also other attributes like footprints, values, and descriptions.
Electronics Forum | Thu Oct 26 11:41:53 EDT 2023 | proceng1
We currently use Loctite 348 chipbonder to secure large parts that will hang under the board when reflowing the second side. Rework has been complaining that they sometimes have to remove those parts to make repairs and it's difficult to remove them